448386
15
Zoom out
Zoom in
Previous page
1/49
Next page
EN
FR
DE
NL
ES
IT
PT
GR
NO
SE
FI
DK
RU
2. CHECK ENGINE FUEL (See Fig. - , )
WARNING
Do not refuel while smoking or near open
ame or other such potential  re hazards.
Otherwise  re accident may occur.
Check fuel level at fuel level gauge (See Fig. - )
If fuel level is low, re ll with unleaded automotive
gasoline.
Be sure to use the fuel  lter screen on the fuel  lter
neck. (See Fig. - )
LEVEL
FUEL TANK CAP
FUEL FILTER SCREEN
Fuel Amount
up to “LEVEL” position : (L)
EG241A . . . . . . . . . . . . . . . . . . . . . . . 12.8
EG321A, EG321AE . . . . . . . . . . . . . 12.8
EG441A, EG441AE . . . . . . . . . . . . . 12.8
EG601A, EG601AE . . . . . . . . . . . . . 22.0
EG671A, EG671AE . . . . . . . . . . . . . 22.0
WARNING
Make sure you review each warning in order to
prevent  re hazard.
Do not re ll tank while engine is running or
hot.
Close fuel cock before refueling with fuel.
Be careful not to admit dust, dirt, water or
other foreign objects Into fuel.
Wipe off spilt fuel thoroughly before starting
engine.
Keep open  ames away.
3. CHECKING COMPONENT PARTS
Check following items before starting engine:
Fuel leakage from fuel hose, etc.
Bolts and nuts for looseness.
Components for damage or breakage.
Generator not resting on or against any adjacent
wiring.
4. CHECK GENERATOR SURROUNDINGS
WARNING
Make sure you review each warning in order to
prevent  re hazard.
Keep area clear of in  ammables or other
hazardous materials.
Keep generator at least 3 feet (1 meter) away
from buildings or other structures.
Only operate generator in a dry, well
ventilated area.
Keep exhaust pipe clear of foreign objects.
Keep generator away from open  ame. No
smoking!
Keep generator on a stable and level surface.
Do not block generator air vents with paper
or other material.
5. GROUNDING THE GENERATOR
To ground the generator to the earth, connect the
grounding lug of the generator to the grounding
spike driven into the earth or to the conductor
which has been already grounded to the earth.
(See Fig. - )
GROUNDING SPIKE
If such grounding conductor or grounding electrode
is unavailable, connect the grounding lug of the
generator to the grounding terminal of the using
electric tool or appliance. (See Fig. - )
GROUND TERMINAL
6. BATTERY INSTALLATION (See Fig. - )
(Electric Starter Model)
Recommended Battery
Type ; Lead-acid battery
Capacity
(Ah/5hr) ; 12V-21AH or more
Size ;
Less than 185(L) x 125(W) x 160(H) mm
EARTH CABLE(BLACK)
STARTER CABLE(RED)
SETTING PLATE
SETTING BOLT
BATTERY PLATE
BATTERY FRAME #1
BATTERY FRAME #2
PROTECTION PLATE
BOLT
NUT
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EG321AE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EG321AE in the language / languages: German as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita EG321AE

Makita EG321AE User Manual - English, Dutch - 49 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info