448381
123
Zoom out
Zoom in
Previous page
1/149
Next page
123
5) Coloque el motor en posición nivelado y eche el aceite nuevo hasta que su
nivel llegue al borde del orificio de reabastecimiento. Durante esta
operación, utilice una botella de reabastecimiento de lubricante.
6) Después de echar el aceite, apriete firmemente la bayoneta de nivel. Un
apriete insuficiente de la bayoneta puede causar fugas de aceite.
PUNTOS RELACIONADOS CON EL ACEITE
Nunca tire el aceite de motor usado a la basura, sobre la tierra o a un canal de aguas residuales. El desecho del aceite del motor
está regulado por la ley. Siga siempre las leyes y regulaciones pertinentes cuando lo deseche. Para una información más
detallada, póngase en contacto con un Agente de Servicio Autorizado.
El aceite se deteriora aunque no se use. Realice inspecciones y cambie el aceite regularmente (cambie el aceite cada 6 meses).
LIMPIEZA DEL DEPURADOR DE AIRE
PELIGRO: LOS MATERIALES INFLAMABLES ESTÁN ESTRICTAMENTE PROHIBIDOS
Intervalo de limpieza e inspección: diariamente (cada 10 horas de funcionamiento)
Gire la palanca de estrangulación a la posición de cierre total y no permita
que entre polvo o suciedad en el carburador.
Quite los pernos de fijación de la cubierta del depurador de aire.
Tire del lado inferior de la cubierta y suéltela.
Si el aceite se adhiere al elemento (esponja), spremerlo fuertemente.
Para contaminacón fuerte :
1) Quitar el elemento (esponja), sumergirlo en el agua templada o en el
detergente neutro diluido en agua, y secarlo completamente.
2) Limpiar el elemento (fieltro) con gasolina, y secarlo completamente.
Antes de colocar el elemento, secarlo completamente. Si el elemento no se
seca completamente, el motor no puede arrancar sin contratiempo.
Secar con tejido usado el aceite adherente en la tapa del filtro de aire y el
repiradero de placa.
Inmediatamente después de terminar la limpieza, instale la cubierta del
depurador y apriétela con los pernos de fijación (coloque primero la garra
superior y luego la inferior).
Manipulación del elemento del filtro de aire
Limpiar el elemento varios veces a diario si hay polvos adherentes en
exceso.
Si la marcha continua con el elemento adhernte del aceite, el aceite en el
filtro de aire puede caerse fuera, provocando contaminación del aceite.
COMPROBACIÓN DE LA BUJÍA
Utilizar solo la llave universal suministrada para quitar o instalar la bujía.
La separación entre ambos electrodos de la bujía debe ser de 0.7 - 0.8mm
(0.028" - 0.032"). Si la separación es mayor o menor, ajustarla. Si la bujía
está obturada con carbonilla o sucia, limpiarla completamente o cambiarla.
PRECAUCIÓN: Nunca tocar el conector de la bujía mientras el motor funciona.
(Riesgo de alto voltaje).
0.7mm-0.8mm
(0.028”-0.032”)
Prender este parte y quitar el
elemento
(
fieltro
)
.
Respiradero
Perno de fijación
Cubierta del
depurador de aire
Elemento (esponja)
Elemento (fieltro)
Placa
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EBH341R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EBH341R in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info