599866

Makita EB7650WH Manual

5
Zoom out
Zoom in
Previous page
1/172
Next page
5
Method of operation
Use the blower only in good light and visibility. Beware of slippery or wet
areas, ice and snow (risk of slipping) , and narrow space.
Always ensure a safe footing.
Never work on unstable surfaces or steep terrain.
Do not work from ladders or high places. Otherwise it may result in
personal injury.
To reduce the risk of personal injury, do not direct air blast towards
bystanders, since the high pressure of the air flow could injure eyes and
could blow small objects at great speed.
Never insert any foreign object into the air intake of the machine or into
the nozzle of the blower. It will damage the fan wheel and may cause
serious injury to the operator or bystanders as a result of the object or
broken parts being thrown out at high speed.
Pay attention to the direction of the wind, i.e., do not work against the
wind.
To reduce the risk of stumbling and loss of control, do not walk backward
while operating the machine.
Always shut off the engine before cleaning or servicing the unit or
replacing parts.
Take a rest to prevent loss of control caused by fatigue. We recommend
to take a 10 to 20-minute rest every hour.
Do not operate the machine near the windows, etc.
To reduce damage from vibration and/or damage to the ears, operate the
machine at low speed if possible and limit the time of operation.
Operate the machine only at reasonable hours. Do not operate the blower
in the morning or late at night when people might be disturbed.
It is recommended for using rakes and brooms to loosen debris before
blowing.
Before blowing, slightly dampen surfaces in dusty conditions or use
water mist sprayer if necessary.
Adjust the length of the blower nozzle so that the stream can work close
to the ground.
To reduce sound levels, limit the number of pieces of equipment used at
any one time.
After using blowers and other equipment, CLEAN UP! Dispose of debris in
trash receptacles.
Maintenance instructions
Be kind to the environment. Operate the blower with as little noise and
pollution as possible. In particular, check the correct adjustment of the
carburetor.
Clean the blower at regular intervals and check that all screws and nuts
are securely tightened.
Never service or store the blower in the vicinity of open flames, sparks,
etc. (11).
Always store the blower in a well-ventilated locked room and with an
emptied fuel tank.
Observe and follow all relevant accident prevention instructions issued by
the trade associations and by insurance companies. Do not perform any
modifications to the blower as this will risk your safety.
The performance of maintenance or repair work by the user is limited to
those activities as described in this instruction manual. All other work is to
be done by Authorized Service Agents.
Use only genuine spare parts and accessories supplied by Makita.
Use of non-approved accessories and tools means increased risk of
accidents and injuries. Makita will not accept any liability for accidents
or damage caused by the use of any non-approved attachment or
accessories.
Never make modification on the equipment. It may cause dangerous
accidents or personal injury.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
(10)
(11)
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EB7650WH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EB7650WH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info