599865

Makita EB7650TH Manual

12
Zoom out
Zoom in
Previous page
1/172
Next page
12
OPERATION
1. Starting
WARNING:
Never attempt engine start in a place where the fuel has been
supplied.
It may cause ignition or fire. When starting the engine, keep a distance
of at least 3 m.
Exhaust gas from the engine is toxic. Do not operate the engine in a
poorly-ventilated place, such as in a tunnel, building, etc.
Operating the engine in the poorly-ventilated place may cause
poisoning by exhaust gas.
In case of detection of any abnormality in sound, odor, vibration after
starting, stop the engine immediately and carry out inspection.
If the engine is operated without attending such abnormality, an
accident may occur.
Do not touch hot engine cover. Otherwise skin burn may result.
Make sure that there are no fuel leakage before starting the engine.
Make sure that the engine stops when the stop switch is set to “O”
position.
1) When the engine is cold or after refuelling (cold start)
(1) Put the blower on a flat surface.
(2) For tube throttle model
Set the stop control lever (1) to “I” position.
(2) For hip throttle model
Set the stop switch (1) to “I” position.
And make sure that the throttle lever (2) is set to low speed
position.
(3) Continue to push the primer pump (3) until fuel comes into the
primer pump.
In general, fuel comes into the carburetor by 7 to 10 pushes.
Even the primer pump is pushed excessively, an excess of
gasoline returns to the fuel tank.
(4) Lift the choke lever (4) to the closed position.
(5) Stump the pedal with your right foot, and hold the top of the unit
cover with left hand to prevent the engine from moving.
(6) Pull out slowly the starter handle till feeling compression.
Then pull it strongly.
Never pull the rope to the full extension.
Return the starter knob gently into the housing. Otherwise
released starter knob may hit your body or it may not rewind
appropriately.
(7) When the engine starts, down the choke lever to open position.
Open the choke lever fully when checking the engine
operation.
In cold temperature or when the engine is not warm enough,
never open the choke lever suddenly. Otherwise, the engine
may stop.
(8) Continue warm-up operation for 2 to 3 minutes.
(9) Warm-up is complete when quick engine acceleration from low
rpm to full throttle is felt.
●
–
●
–
●
–
●
●
●
●
●
●
●
●
●
(1)
EB7650TH EB7650WH
(2)
(1)
(4)
(3)
(6)
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EB7650TH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EB7650TH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info