690561

Makita EB5300WH Manual

6
Zoom out
Zoom in
Previous page
1/232
Next page
6 ENGLISH
Method of operation
1. Use the blower only in good light and visibility.
Beware of slippery or wet areas, ice and snow
(risk of slipping), and narrow space. Always
ensure a safe footing.
2. Never work on unstable surfaces or steep
terrain.
3. Do not work from ladders or high places.
Otherwise it may result in personal injury.
4. To reduce the risk of personal injury, do not
direct air blast towards bystanders, since the
high pressure of the air ow could injure eyes
and could blow small objects at great speed.
5. Never insert any foreign object into the air
intake of the machine or into the nozzle of
the blower. It will damage the fan wheel and
may cause serious injury to the operator or
bystanders as a result of the object or broken
parts being thrown out at high speed.
6. Pay attention to the direction of the wind, i.e.,
do not work against the wind.
7. To reduce the risk of stumbling and loss of
control, do not walk backward while operating
the machine.
8. Always stop the engine before cleaning or
servicing the unit or replacing parts.
9. Take a rest to prevent loss of control caused
by fatigue. We recommend to taking a 10 to
20-minute rest every hour.
10. Do not operate the machine near the windows,
etc.
11. To reduce physical inuence from vibra-
tion and/or damage to the ears, operate the
machine at low speed if possible and limit the
time of operation.
12. Operate the machine only at reasonable hours.
Do not operate the blower in the morning or
late at night when people might be disturbed.
13. It is recommended for using rakes and brooms
to loosen debris before blowing.
14. Before blowing, slightly dampen surfaces in
dusty conditions or use water mist sprayer if
necessary.
15. Adjust the length of the blower nozzle so that
the stream can work close to the ground.
16. To reduce sound levels, limit the number of
pieces of equipment used at any one time.
17. After using blowers and other equipment,
CLEAN UP! Dispose of debris in trash
receptacles.
18. Do not accelerate the engine more than nec-
essary. Blown object may result in personal
injury.
19. The exhaust mufer becomes hot during the
operation. Do not touch hot exhaust mufer,
skin burn may result.
20. Do not operate the machine in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. The machine creates
sparks which may ignite the dust or fumes.
Maintenance instructions
1. Be kind to the environment. Operate the
blower with as little noise and pollution as pos-
sible. In particular, check the correct adjust-
ment of the carburetor.
2. Clean the blower at regular intervals and
check that all screws and nuts are securely
tightened.
3. Never service or store the blower in the vicin-
ity of open ames, sparks, etc.
4. Always store the blower in a well-ventilated
locked room and with the fuel tank emptied.
5. The performance of maintenance or repair
work by the user is limited to those activities
as described in this instruction manual. All
other work is to be done by Authorized Service
Agents.
6. Use only genuine spare parts and accesso-
ries supplied by Makita. Use of non-approved
accessories and tools may result in accidents
and injuries. Makita will not accept any liability
for accidents or damage caused by the use of
any non-approved attachment or accessories.
7. Incorrect repair and poor maintenance can
shorten the life of the equipment and increase
the risk of accidents.
First aid
1. In case of accident make sure that a well-stocked
rst-aid kit is available in the vicinity of the opera-
tions. Immediately replace any item taken from the
rst aid kit.
2. When asking for help, give the following
information:
— Place of the accident
— What happened
— Number of injured persons
— Nature of the injury
— Your name
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EB5300WH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EB5300WH in the language / languages: All languages as an attachment in your email.

The manual is 46,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info