690910
27
Zoom out
Zoom in
Previous page
1/54
Next page
27
Before making a request for repairs, check for trouble by yourself. For repairs, contact authorized service centers.
Malfunction status Possible cause Remedy
Chain does not run. Chain brake is engaged. Release chain brake.
Engine does not start.
Spark plug malfunction. Check the spark plug.
Fuel tank is empty. Fill the fuel tank.
Fuel supply problem. Check whether the fuel lter is not clogged.
Tool malfunction. Ask your local authorized service center for repair.
Insufcient performance.
Air cleaner is dirty. Clean the air cleaner. Replace it if necessary.
Cylinder space is dirty. Clean cylinder space.
Environment temperature is very low.
Change the shutter setting of the carburetor. See
section “Prevention from carburetor icing”.
No oil on the saw chain.
Oil tank is empty. Fill the oil tank.
Oil guide groove is dirty. Clean the groove.
Oil delivery is not adjusted properly. Adjust amount of oil delivery.
Oil pump malfunction. Ask your local authorized service center for repair.
Chain does not stop even the chain
brake is activated.
Brake band worn down.
Stop using the tool immediately, and ask your local
authorized service center for repair.
The tool vibrates abnormally.
Loose guide bar or saw chain. Adjust the guide bar and saw chain tension.
Tool malfunction.
Stop using the tool immediately, and ask your local
authorized service center for repair.
Chain does not stop when engine is
idle.
Idle speed is too high. Correct idle speed.
Clutch defect.
Stop using the tool immediately, and ask your local
authorized service center for repair.
TROUBLE SHOOTING
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita EA3600F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita EA3600F in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 12,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info