599976

Makita DVF154 Manual

6
Zoom out
Zoom in
Previous page
1/22
Next page
6
3. Charge the battery cartridge with room
temperature at 10 잧
C - 40 잧 C (50 잧 F - 104 잧 F).
Let a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge once in every six
months if you do not use it for a long period of
time.
FUNCTIONAL DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and the
battery cartridge is removed before adjusting or
checking function on the tool.
Installing or removing battery cartridge
Fig.1
Open Garden Sprayers battery pack cover.
Always switch off the tool before insertion or
removal of the battery cartridge.
To remove the battery cartridge, withdraw it from
the tool while sliding the button on the front of the
cartridge.
To insert the battery cartridge, align the tongue on
the battery cartridge with the groove in the housing
and slip it into place. Always insert it all the way
until it locks in place with a little click. If you can
see the red part on the upper side of the button, it
is not locked completely. Insert it fully until the red
part cannot be seen. If not, it may accidentally fall
out of the tool, causing injury to you or someone
around you.
Do not use force when inserting the battery
cartridge. If the cartridge does not slide in easily, it
is not being inserted correctly.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out
any work on the tool.
Spray pipe and nozzle assembly method
1
2
3
010133
As shown in the figure, assemble spray pipe and
then nozzle onto lever cock.
Adjust direction of nozzle using nut on spray pipe.
Firmly attach components to ensure there is no
leaking.
Select nozzle according to type of spraying to be
done.
NOTE:
All connector units use packing. Before assembly,
always check to see that the units have packing.
Check to make sure that the spray hose is not
cracked, worn and/or damaged.
Firmly tighten on the spray pipe to prevent liquid
leaks.
If there is a leak from a connector unit, tighten
further using a hand tool (by approximately 45
degrees).
Do not use a spray pipe that is longer than the
standard one provided. Doing so may cause
leaking from connector units.
1. Spray pipe
2. lever cock
3. Nozzle
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DVF154 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DVF154 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info