Manual Makita DVC861L (page 11 of 92) (English, German, Dutch, Danish, French, Italian, Portuguese, Portuguese, Spanish)

657968

Zoom out

Zoom in

1/92

Remaining battery capacity indication

015527

Indicating the remaining battery capacity

(Only for battery cartridges with “B” at the end of the

model number.) (Fig. 7)

Press the check button on the battery cartridge to indicate

the remaining battery capacity. The indicator lamps light

up for few seconds.

015658

NOTE:

• Depending on the conditions of use and the ambient

temperature, the indication may differ slightly from the

actual capacity.

Switch action (Fig. 8)

To start the cleaner:

1. Set the stand-by switch to the “I” side. The cleaner

gets into stand-by state.

2. Press the power button.

To make the cleaner get into stand-by mode, press the

power button again.

To turn off the cleaner, set the stand-by switch to the “O”

side.

The suction power can be adjusted according to your

work need.

Suction power can be increased by turning the suction

force adjusting knob from the symbol to the

symbol.

NOTICE:

• Always set the stand-by switch to the “O” side when not

using the cleaner for long time. The cleaner consumes

power during stand-by state.

Auto-suction stop during wet suction

operation (for the cloth filter model)

WARNING:

• Do not use for a long time while the float is at work.

Using the cleaner with its float at work for a long time

can cause overheat, resulting in the cleaner

deformation.

• Do not pick up foam or soapy liquid. Picking up

foam or soapy liquid can cause foam to come out of air

exit before the float works. Continuing to using in this

condition may cause an electric shock and breakage of

the cleaner.

Auto-suction stop works only when using with the float

and float cage.

The cleaner has a float mechanism that prevents water

from immersing into the motor when picking up more than

a certain amount of water.

When the tank is full and the cleaner no longer picks up

water, switch off the cleaner and empty the tank.

Locking or unlocking the caster (Fig. 9)

To lock the caster with a stopper, lower the stopper lever

and the caster no longer will rotate. To release the caster

from the locked position, raise the stopper lever.

Locking the caster is convenient when storing the cleaner,

stopping the work on the way and keeping the cleaner

still.

To operate the stopper, move it by hand.

NOTE:

• When moving the cleaner, make sure that the caster is

unlocked. Moving the cleaner with the caster in the

locked position may cause damage to the caster.

Carriage handle (Fig. 10)

When carrying the cleaner, carry it by holding the handle

on the head. The handle is retractable at the head when

not in use.

PARTS DESCRIPTION

Model DVC860L

(Cloth filter (for dry and wet dust) model) (Fig. 11)

Model DVC861L

(Powder filter (for dry dust) model) (Fig. 12)

Battery indicator status

Remaining battery

capacity

: On : Off : Blinking

50% - 100%

20% - 50%

0% - 20%

Charge the battery

Indicator lamps

Remaining

capacity

Lighted Off Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

The battery may

have

malfunctioned.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DVC861L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 16,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DVC861L Manual

Product: