Manual Makita DVC750L (page 11 of 84) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691490

Zoom out

Zoom in

1/84

11 ENGLISH

Connecting the hose

NOTICE: Never force the hose for bending or

stamp it. Never move the cleaner by a hose.

Forcing, stamping and pulling the hose may cause a

breakage or deformation of the hose.

NOTICE: Do not pick up large wastes such as

planer carvings and concrete pieces. It may cause

ahosestufnganddamage.

For vacuum cleaning

Insert the hose into the suction inlet and turn it clock-

wise until it clicks.

►Fig.7: 1. Suction inlet

For blowing

Insert the hose to blower outlet and turn it clockwise

until it clicks.

►Fig.8: 1. Blower outlet

NOTE: This cleaner has the suction inlet and blower

outlet separately. Connect the hose to the proper port

depending on your work.

Connecting the nozzle

Attach the wide nozzle, sash nozzle, or other nozzles

supplied as optional accessories depending on your

purpose.

To attach the nozzle, twist and insert it to the end of the

hose.

►Fig.9

Connecting the tool

Optional accessory

To connect the tool, connect the end of the hose to the

tool's extraction outlet. Depending on the tool, you may

needtheoptionaljoint22-38orthefrontcuff24.

►Fig.10: 1. Hose 2. Joint 22-38 3. Front cuff 24

NOTE: When connecting the tool, always make sure

that the hose is connected to the suction inlet on the

cleaner.

Storage of hose and nozzles

The hose and nozzles can be stored on the tool as

illustrated.

►Fig.11: 1. Sash nozzle 2. Wide nozzle

Whenstoringthehose,loopitonthetoolandxitwith

the hook as illustrated.

►Fig.12: 1. Hose 2. Hook

Installing the shoulder strap

Optional accessory

Attach the hooks of the shoulder strap onto the mounts

ofthecleanerasshowninthegure.

►Fig.13: 1. Shoulder strap 2. Hook 3. Mount

OPERATION

Using as a vacuum cleaner

NOTICE: Be sure to dry the HEPA lter after pick-

ing up water or wet dust.Ifyouusethewetlter,the

suction power may be reduced.

1. Install the hose and nozzle onto the suction inlet

and turn on the tool.

2. After vacuum cleaning, empty the tank before it

becomes full.

►Fig.14

Using as a blower

CAUTION: Do not blow out muddy water such

as pool and sand area.Ifforeignobjectsareblown

intoeyes,itmayresultinpersonalinjury.

CAUTION: Do not operate as a blower against

the wind.Ifforeignobjectsareblownintoeyes,it

mayresultinpersonalinjury.

CAUTION: Always use protective goggles, a

cap and mask while operating.

CAUTION: Never point the nozzle at anyone

in the vicinity.

CAUTION: The operator or user is responsi-

ble for accidents or hazards occurring to other

people or their property.

CAUTION: Do not use the tool for blowing

air into objects, like rubber rafting, balls or other

inatable products. Increased motor revolution may

cause dangerous fan breakage.

1. Install the hose into the blower outlet.

2. Pointthehosetiptotheobjecttobeblownoffand

turn on the tool.

►Fig.15

NOTE: To clean narrow space, connecting the sash

nozzle to the hose makes it easy.

MAINTENANCE

CAUTION:

Always be sure that the tool is

switched off and the battery cartridge is removed before

attempting to perform inspection or maintenance.

CAUTION: To reduce the contact to the dust,

use goggles and dust mask when emptying the

tank or cleaning the lter.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

To maintain product SAFETY and RELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

be performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DVC750L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 16,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DVC750L Manual

Product: