Manual Makita DVC265 (page 14 of 34) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691489

Zoom out

Zoom in

1/34

14 ENGLISH

Connecting the tool

If the bent pipe assembly is attached to the hose,

loosen the sleeve of bent pipe assembly and remove it.

►Fig.12: 1. Hose 2. Bent pipe assembly 3. Sleeve

1. Attach the front cuff to the hose for dust extraction.

When connecting the front cuff, make sure that it is

securely screwed on the hose.

2. Connect the front cuff to the tool's extraction

outlet.

►Fig.13: 1. Front cuff 2. Extraction outlet 3. Hose

The front cuff can be detached by turning it counter-

clockwise while holding the hose.

NOTE: Always use a suitable front cuff. When using

the front cuff 24, attach it to the front cuff 22 that is

connected to the hose.

►Fig.14: 1. Front cuff 22 2. Front cuff 24

Using as a cleaner

If you want to use this product as a cleaner, follow the

below procedures.

NOTICE: If the front cuff is attached to the hose,

remove it beforehand.

NOTE: The bent pipe assembly, extension wand, and

nozzles are supplied as optional accessories in some

countries.

NOTE: There are two types of bent pipe assembly;

the one for slide-type extension wand and the one for

ring-type extension wand. If you prepare the bent pipe

assembly, choose the one for your desired extension

wand type.

1. Fasten the sleeve of bent pipe assembly onto the

hose.

►Fig.15: 1. Hose 2. Bent pipe assembly 3. Sleeve

To remove the bent pipe assembly, loosen the sleeve of

bent pipe assembly from the hose.

2. Twist and insert the nozzle to the extension wand.

►Fig.16: 1. Extension wand 2. Free nozzle

3. T-shape nozzle 4. T-shape nozzle (slim)

NOTE: By twisting the nozzle while inserting, the noz-

zle can be attached to the extension wand securely.

3. Follow the procedures below, depending on the

type of the extension wand :

NOTE: The slide-type extension wand and the ring-

type extension wand are not compatible with each

other. If you want to change the slide-type extension

wand to the ring-type extension wand or vice versa,

change the bent pipe assembly also.

NOTE: The free nozzle can be attached to the bent

pipe assembly directly.

For the slide-type extension wand

Shoulder the vacuum cleaner body then insert the

extension wand into the bent pipe assembly until it

clicks. To disconnect, extract the extension wand with

pressing the button.

►Fig.17: 1. Bent pipe assembly 2. Button 3. Slide-

type extension wand 4. Free nozzle

Thelengthofthewandcanbeadjusted.

Withpressingtheslidebutton,adjustthewandlength.

The length is locked when release the slide button.

►Fig.18: 1. Slide button

For the ring-type extension wand

Shoulder the vacuum cleaner body then twist and insert

the extension wand into the bent pipe assembly. To

disconnect, twist and extract it.

►Fig.19: 1. Bent pipe assembly 2. Ring-type exten-

sion wand 3. Free nozzle

Thelengthofthewandcanbeadjusted.

Loosentheringonthewandandadjustthewand

length. Tighten the ring at your desired length.

►Fig.20: 1. Ring

Hose hook

When you suspend the operation, the hook on the bent

pipe assembly can be used for hanging the wand on the

lower belt.

►Fig.21

Installing lter bag / dust bag

Optional accessory

CAUTION: Do not use a damaged lter bag.

Always use the vacuum cleaner with the lter bag

properly installed. Otherwise the vacuumed dust

or particles may be exhausted from the cleaner

and they may cause respiratory disease to the

operator.

NOTICE:Whenthelterbagisalreadyfull,replace

with new one. When the dust bag is already full,

emptyit.Continuoususewiththelterbag/dustbag

full results in reduced suction power.

1. Unlock the latch by lifting the bottom side. Push

the grooved area to lift the front latching side. Pull the

latch to open the lid.

►Fig.22: 1. Hook 2. Lid

2. Insertthelterbagintotheslitontheuppersideof

the room as illustrated.

►Fig.23: 1. Slit 2. Filter bag

When using the dust bag, insert the brim of the dust bag

into the slit.

►Fig.24: 1. Slit 2. Brim 3. Dust bag

3. Aligntheholeofthelterbagwiththehosecuff

and push the cardboard portion to the end. Make sure

thattherubberringonthelterbaggoesovertherim

on the hose cuff.

►Fig.25: 1.Rubberringonthelterbag2. Rim on

the hose cuff 3. Cardboard portion of the

lterbag4. Hose cuff

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DVC265 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 6,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DVC265 Manual

Product: