Manual Makita DUX60 (page 11 of 92) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690630

Zoom out

Zoom in

1/92

11 ENGLISH

ASSEMBLY

WARNING: Always be sure that the tool is

switched off and battery cartridge is removed

before carrying out any work on the tool.Failureto

switchoffandremovethebatterycartridgemayresult

inseriouspersonalinjuryfromaccidentalstart-up.

WARNING: Never start the tool unless it is

completely assembled.Operationofthetoolina

partiallyassembledstatemayresultinseriousper-

sonalinjuryfromaccidentalstart-up.

Mounting the handle

Attachthehandlewithsuppliedclampsandbolts.Make

surethatthehandleislocatedbetweenthespacerand

the arrow mark. Do not remove or shrink the spacer.

►Fig.8: 1. Handle 2.Hexsocketbolt3. Clamp

4.Spacer5.Arrowmark

Attachthebarrier(countryspecic)tothehandleusing

thescrewonthebarrier.Onceassembled,donot

removethebarrier.

►Fig.9: 1. Barrier 2.Screw

Mounting the attachment pipe

Mount the attachment pipe to the power unit.

1. Turnthelevertowardthecuttingattachment.

►Fig.10: 1. Lever

2. Alignthepinwiththearrowmarkandinsertthe

attachmentpipeuntilthereleasebuttonpopsup.

►Fig.11: 1.Releasebutton2.Arrowmark3.Pin

3. Turnthelevertowardthepowerunit.

►Fig.12: 1. Lever

Makesurethatthesurfaceoftheleverisparalleltothe

pipe.

Toremovethepipe,turnthelevertowardthecutting

attachment and pull the pipe out while pressing down

thereleasebutton.

►Fig.13: 1.Releasebutton2. Lever 3.Pipe

Adjusting the handle/hanger

position

Adjustthehandleandhangerpositiontoobtainconfort-

ablehandlingofthetool.

Loosenthehexsocketheadboltonthehandle.Move

thehandletoacomfortableworkingpositionandthen

tightenthebolt.

►Fig.14: 1. Handle 2.Hexsocketheadbolt

Loosenthehexsocketheadboltonthehanger.Move

thehangertoacomfortableworkingpositionandthen

tightenthebolt.

►Fig.15: 1.Hexsocketheadbolt2. Hanger

Attaching shoulder harness

WARNING: Be extremely careful to maintain

control of the tool at all times. Do not allow the

tool to be deected toward you or anyone in the

work vicinity.Failuretokeepcontrolofthetool

couldresultinseriousinjurytothebystanderandthe

operator.

CAUTION: Always use the shoulder harness

attached. Before operation, adjust the shoulder

harness according to the user size to prevent

fatigue.

Puttheshoulderharnessonyourleftshoulderbyput-

tingyourheadandrightarmthroughit.Keepthetoolon

yourrightside.

Afterputtingtheshoulderharness,attachittothetool

byconnectingthebucklesprovidedonboththetool

hookandtheharness.Besurethatthebucklesclick

andlockcompletelyinplace.

Adjustthestraptothesuitablelengthforyouroperation.

►Fig.16: 1. Hanger 2. Hook

Thebuckleisprovidedwithameansofquickrelease

whichcanbeaccomplishedbysimplysqueezingthe

sidesandthebuckle.

►Fig.17: 1. Buckle

Hex wrench storage

CAUTION: Be careful not to leave the hex

wrench inserted in the tool head. Itmaycause

injuryand/ordamagetothetool.

Whennotinuse,storethehexwrenchasillustratedto

keepitfrombeinglost.

►Fig.18: 1. Handle 2.Hexwrench

MAINTENANCE

WARNING: Always be sure that the tool is

switched off and battery cartridge is removed

before attempting to perform inspection or main-

tenance on the tool.Failuretoswitchoffandremove

thebatterycartridgemayresultinseriouspersonal

injuryfromaccidentalstart-up.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUX60 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 17,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUX60 Manual

Product: