Manual Makita DUR181RT (page 8 of 92) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

711145

Zoom out

Zoom in

1/92

.................. Top permissible tool speed.

............ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries

and Accumulators and Waste Batteries

and Accumulators and their

implementation in accordance with

national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be

collected separately and returned to an

environmentally compatible recycling

facility.

IMPORTANT SAFETY

INSTRUCTIONS GEB092-5

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for

future reference.

1. Be familiar with the controls and proper use of the

equipment.

2. Cutting elements continue to rotate after the motor

is switched off.

3. Never allow children or people unfamiliar with the

instructions to use the machine.

4. Stop using the machine while people, especially

children, or pets are nearby.

5. Only use the machine in daylight or good artificial

light.

6. Before using the machine and after any impact,

check for signs of wear or damage and repair as

necessary.

7. Take care against injury from any device fitted for

trimming the filament line length. After extending

new cutter line always return the machine to its

normal operating position before switching on.

8. Never fit metal cutting elements.

9. This appliance is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they have been

given supervision or instruction concerning use

of the appliance by a person responsible for their

safety. Children should be supervised to ensure

that they do not play with the appliance.

10. Use the tool with the utmost care and attention.

11. Operate the tool only if you are in good physical

condition. Perform all work calmly and carefully.

Use common sense and keep in mind that the

operator or user is responsible for accidents or

hazards occurring to other people or their

property.

12. Never operate the tool when tired, feeling ill or

under the influence of alcohol or drugs.

13. The tool should be switched off immediately if it

shows any signs of unusual operation.

Intended use of the tool

1. Use right tool. The cordless string trimmer is only

intended for cutting grass, light weeds. It should

not be used for any other purpose such as hedge

cutting as this may cause injury.

Personal protective equipment (Fig. 1 & 2)

1. Dress Properly. The clothing worn should be

functional and appropriate, i.e. it should be tight-

fitting but not cause hindrance. Do not wear either

jewelry or clothing which could become entangled

with high grass. Wear protective hair covering to

contain long hair.

2. When using the tool, always wear sturdy shoes

with a non-slip sole. This protects against injuries

and ensures a good footing.

3. Wear protective glasses or goggles.

Electrical and battery safety

1. Avoid dangerous environment. Don’t use the tool

in damp or wet locations or expose it to rain.

Water entering the tool will increase the risk of

electric shock.

2. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one

type of battery pack may create a risk of fire when

used with another battery pack.

3. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

4. Do not dispose of the battery(ies) in a fire. The cell

may explode. Check with local codes for possible

special disposal instructions.

5. Do not open or mutilate the battery(ies). Released

electrolyte is corrosive and may cause damage to

the eyes or skin. It may be toxic if swallowed.

Starting up the tool (Fig. 3)

1. Make sure that there are no children or other

people within a working range of 15 meters (50 ft),

also pay attention to any animals in the working

vicinity. Otherwise stop using the tool.

2. Before use always check that the tool is safe for

operation. Check the security of the cutting tool

and the guard and the switch trigger/lever for easy

and proper action. Check for clean and dry

handles and test the on/off function of the switch.

3. Check damaged parts before further use of the

tool. A guard or other part that is damaged should

car

efully checked to determine that it will

operate properly and perform its intended

function. Check for alignment of moving parts,

binding of moving parts, breakage of parts,

mounting, and any other condition that may affect

its operation. A guard or other part that is

damaged should be properly repaired or replaced

by our authorized service center unless indicated

elsewhere in this manual.

Ni-MH

Li-ion

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUR181RT in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 8,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUR181RT Manual

Product: