Manual Makita DUR142L (page 11 of 96) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

599969

Zoom out

Zoom in

1/96

7. Never work on unstable surfaces.

8. Don’t overreach. Keep proper footing and balance

at all times.

9. Remove sand, stones, nails etc. found within the

working range. Foreign particles may damage the

cutting tool and can cause to be thrown away,

resulting in a serious injury.

10. Should the cutting tool hit stones or other hard

objects, immediately switch off the motor and

inspect the cutting tool.

11. Before commencing cutting, the cutting tool must

have reached full working speed.

12. During operation always hold the tool with both

hands. Never hold the tool with one hand during

use. Always ensure a safe footing.

13. All protective equipment such as guards supplied

with the tool must be used during operation.

14. Except in case of emergency, never drop or cast

the tool to the ground or this may severely

damage the tool.

15. Never drag the tool on the ground when moving

from place to place, the tool may become

damaged if moved in this manner.

16. Always remove the battery cartridge from the tool:

- whenever leaving the tool unattended;

- before clearing a blockage;

- before checking, cleaning or working on the

tool;

- before making any adjustments, changing

accessories or storing;

- whenever the tool starts vibrating unusually;

- whenever transporting the tool.

17. Don’t force the tool. It will do the job better and

with less likelihood of a risk of injury at the rate for

which it was designed.

Maintenance instructions

1. The condition of the cutting tool, protective

devices and shoulder strap must be checked

before commencing work.

2. Turn off the motor and remove the battery

cartridge before carrying out maintenance,

replacing the cutting tool and cleaning the tool.

3. After use, disconnect the battery cartridge from

the tool and check for damage.

4. Check for loose fasteners and damaged parts

such as nearly halfway cut-off state in the cutting

tool.

5. When not in use store the equipment in a dry

location that is locked up or out of children’s

reach.

6. Use only the manufacturer’s recommended

replacement parts and accessories.

7. Always ensure that ventilation openings are kept

clear of debris.

8. Inspect and maintain the tool regularly, especially

before/after use. Have the tool repaired only by

our authorized service center.

9. Keep handles dry, clean and free from oil and

grease.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

IMPORTANT SAFETY

INSTRUCTIONS ENC007-8

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product using

battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively shorter,

stop operating immediately. It may result in a risk

of overheating, possible burns and even an

explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it is

severely damaged or is completely worn out. The

battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. Follow your local regulations relating to disposal

of battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the battery

cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room

temperature at 10°C - 40°C (50°F - 104°F). Let a hot

battery cartridge cool down before charging it.

4. Charge the battery cartridge once in every six

months if you do not use it for a long period of

time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUR142L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita DUR142L

Makita DUR142L User Manual - English, Dutch - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUR142L Manual

Product: