Manual Makita DUP362 (page 9 of 104) (English, German, Danish, French, Italian, Portuguese, Turkish, Spanish)

695757

Zoom out

Zoom in

1/104

9 ENGLISH

WARNING: The vibration emission during

actual use of the power tool can differ from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

Pruning shears safety warnings

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructionsmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

1. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

willreducepersonalinjuries.

2. Always wear protective goggles to protect

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in

the USA, EN 166 in Europe, or AS/NZS 1336

in Australia/New Zealand. In Australia/New

Zealand, it is legally required to wear a face

shield to protect your face, too.

It is an employer's responsibility to enforce

the use of appropriate safety protective equip-

ments by the tool operators and by other per-

sons in the immediate working area.

Prevent unintentional starting. Ensure the switch is in

the off-position before connecting to power source and/

or battery pack, picking up or carrying the tool. Carrying

powertoolswithyourngerontheswitchorenergising

power tools that have the switch on invites accidents.

4. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts.Looseclothes,jewel-

leryorlonghaircanbecaughtinmovingparts.

5. This tool is for pruning branches. Do not use it

foranyjobexceptthatforwhichitisintended.

Never allow children, persons with reduced

physical, sensory or mental capabilities or lack

of experience and knowledge or people unfamil-

iar with these instructions to use the tool. Local

regulations may restrict the age of the operator.

7. Children should be supervised to ensure that

they do not play with the appliance.

8. Never operate the tool while people, especially

children, or pets are nearby.

Do not overreach and keep balance at all times. Always

besureoffootingonslopesandtowalk,neverrun.

10. Do not touch moving hazardous parts before

the tool is disconnected from the mains and/or

the battery pack is removed from the tool.

11. Always wear substantial footwear and long

trousers while operating the tool.

12. Disconnect the supply and/or remove the

battery pack from the tool:

• wheneverthetoolisleftbytheuser,

• beforeclearingablockage,

•

beforechecking,cleaningorworkingonthetool,

• afterstrikingaforeignobjecttoinspectthe

tool for damage,

• ifthetoolstartstovibrateabnormally,for

immediately check.

13. Never operate the tool with defective guards

or shields, or without safety devices, or if the

cord is damaged or worn.

14. Avoid using the tool in bad weather conditions

especially when there is a risk of lightning.

15. Don’t use the tool or perform battery charging

operations in the rain.

16. Don’t leave the tool in rain or wet locations.

17. Be careful not to catch foreign matter between

the blades.Ifthebladesarejammedwithforeign

matter, immediately switch off the tool and discon-

nectthebatteryfromthetool.Thenremovethe

foreignmatterfromtheblades.

18. Never hold the branch you are pruning with

your free hand. Keep your free hand away from

thecuttingarea.Nevertouchtheblades,theyare

very sharp and you may cut yourself.

19.

Don’t force the tool to make it cut. You could slip and

injureyourselforcutsomethingelseunintentionally.

20.

Avoid cutting electrical wires that may be hidden.

21.

Always check the blades carefully before operation.

22. Handle the blades with extreme care to prevent

cuts or injury from the blades.

23. Disconnect the battery from the tool after each

use and before attempting to perform inspec-

tion or maintenance.

24.

When not in use, always keep the tool in its holster.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUP362 in the language / languages: English, German, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 18,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUP362 Manual

Product: