Manual Makita DUM604 (page 11 of 108) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690637

Zoom out

Zoom in

1/108

11 ENGLISH

NOTE:Thedeclaredvibrationemissionvaluehas

beenmeasuredinaccordancewiththestandardtest

methodandmaybeusedforcomparingonetoolwith

another.

NOTE:Thedeclaredvibrationemissionvalue

mayalsobeusedinapreliminaryassessmentof

exposure.

WARNING:Thevibrationemissionduringactual

useofthepowertoolcandifferfromthedeclared

emission value depending on the ways in which the

tool is used.

WARNING:Besuretoidentifysafetymeasures

toprotecttheoperatorthatarebasedonanestima-

tionofexposureintheactualconditionsofuse(taking

accountofallpartsoftheoperatingcyclesuchas

thetimeswhenthetoolisswitchedoffandwhenitis

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool.Failuretofollowallinstructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Cordless Grass Shear Safety

Warnings

General instructions

1. To ensure correct operation, user has to read

this instruction manual to make himself famil-

iar with the handling of the equipment.Users

insufcientlyinformedwillriskdangertothem-

selves as well as others due to improper handling.

2. Never allow children, persons with reduced

physical, sensory or mental capabilities or

lack of experience and knowledge or people

unfamiliar with these instructions to use the

machine, local regulations may restrict the age

of the operator.

3. Use the equipment with the utmost care and

attention.

4. Operate the equipment only if you are in good

physical condition. Perform all work calmly

and carefully. Use common sense and keep in

mind that the operator or user is responsible

for accidents or hazards occurring to other

people or their property.

5. Never operate the machine while people, espe-

cially children, or pets are nearby.

6. The motor is to be switched off immediately in

case that the equipment shows any problem or

abnormal sign.

7. Switch off and remove the battery cartridge

when resting and when leaving the equipment

unattended, and place it in a safe location to

prevent danger to others or damage to the

equipment.

8. Avoid using the machine in bad weather

conditions especially when there is a risk of

lightning.

Personal protective equipment

1. Wear eye protection and stout shoes at all

times while operating the machine.

2. Always wear substantial footwear and long

trousers while operating the machine.

Starting up the equipment

1. Make sure that there are no children or other

people nearby, also pay attention to any ani-

mals in the working vicinity. Otherwise stop

usingtheequipment.

2. Before use always check that the equipment

is safe for operation. Check the security of the

cutting tool and the guard and the switch trig-

ger/lever for easy and proper action. Check for

clean and dry handles and test the function of

the start/stop.

3. Check damaged parts before further use of

the equipment. A guard or other part that is

damaged should be carefully checked to deter-

mine that it will operate properly and perform

its intended function. Check for alignment of

moving parts, binding of moving parts, break-

age of parts, mounting, and any other condi-

tion that may affect its operation. A guard or

other part that is damaged should be properly

repaired or replaced by our authorized ser-

vice center unless indicated elsewhere in this

manual.

4. Switch on the motor only when the hands and

feet are away from the cutting tool.

5. Before starting make sure that the cutting tool

has no contact with any objects.

Method of operation

1. Only use the equipment in good light and

visibility. During the winter season beware

of slippery or wet areas, ice and snow (risk

of slipping). Always ensure a safe footing on

slopes and be sure to walk and never run.

2. Take care against injury to feet and hands from

the cutting tool.

3. Never stand on a ladder and run the

equipment.

4. Never climb up into trees to perform cutting

operation with the equipment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUM604 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 17,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUM604 Manual

Product: