Manual Makita DUH752 (page 15 of 96) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690901

Zoom out

Zoom in

1/96

15 ENGLISH

Storage

The hook hole in the tool bottom is convenient for hang-

ing the tool from a nail or screw on the wall.

Attach the blade cover to the shear blades so that the

blades are not exposed. Store the tool out of the reach

of children. Store the tool in a place not exposed to

moisture or rain.

► Fig.33: 1. Hole

Grinding the shear blades

NOTICE: If the shear blades have considerably

deformed by grinding, replace the shear blades

with new ones.

1. Install the battery cartridge to the tool.

2. Turn on and start the tool so that the upper blade

and lower blade are positioned alternately.

► Fig.34

3. Turn off the tool and remove the battery cartridge

from the tool.

4. Remove the screw, and then remove the branch

catcher.

► Fig.35: 1. Screw 2. Branch catcher

5. Set the angle of a le to 45°, and grind the upper

blade from 3 directions with the le.

► Fig.36: (1) File (2) 45°

CAUTION: Before grinding the shear blades,

make sure that the tool is switched off and the

battery cartridge is removed from the tool.

6. Place the tool upside down, and then remove the

burrs from the shear blades with the le.

► Fig.37: 1. File

7. Set the angle of the le to 45°, and grind the lower

blade from 3 directions with the le.

8. Return the tool to normal position, and then

remove the burrs from the shear blades with the le.

9. Attach the branch catcher by tightening the screw.

Grease lubrication

Interval of lubrication: Every 100 operating hours

1. Remove 3 screws, and then remove the bottom

cover.

► Fig.38: 1. Screw 2. Bottom cover

2. Remove the cap from the grease vessel, and then

attach the grease vessel to the hole on the cover by

turning the grease vessel.

► Fig.39: 1. Cover 2. Grease vessel

3. Apply the grease to the tool (Approximately 5 g as

a guide).

4. Remove the grease vessel.

5. Attach the bottom cover, and then tighten 3

screws.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or attachment

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

• Shear blade assembly

• Shear blade cover

• Chip receiver

• Grease vessel

• Makita genuine battery and charger

NOTE: Some items in the list may be included in the

tool package as standard accessories. They may

differ from country to country.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUH752 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 20,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUH752 Manual

Product: