599980
7
Zoom out
Zoom in
Previous page
1/68
Next page
7
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
Specifications and battery cartridge may differ from country to country.
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Wear ear protection.
ENG901-1
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
Symbol
END013-4
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.......Read instruction manual.
................... Do not expose to rain.
............. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste Batteries
and Accumulators and their
implementation in accordance with
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Battery indicator
6. Knob
7. Housing
8. Switch trigger B
9. Switch trigger A
10. Lock-off button
11. Adjusting dial
12. Trimming direction
13. Hedge surface to be trimmed
14. Tilt the blades
15. Press
16. Chip receiver
17. Nut
18. Shear blade
19. Branch catcher
20. Hooks
21. Fit the hooks into groove
22. Grooves
23. Press the levers on both sides
24. Unlock the hooks
25. Blade cover
26. Screws
27. Under cover
28. Plate
29. Crank
30. Oval hole of shear blade
31. Limit mark
32. Holder cap cover
33. Slotted screwdriver
34. Brush holder cap
Model DUH551 DUH651
Blade length 550 mm 650 mm
Strokes per minute (min
-1
) 1,000 - 1,800
Overall length 1,065 mm 1,135 mm
Rated voltage D.C.36V
Net weight 5.1 kg 5.2 kg
Noise Sound pressure level Sound power level
Applicable standard or
directive
Model L
PA
(dB (A))
Uncertainty K
(dB (A))
L
PA
(dB (A))
Uncertainty K
(dB (A))
DUH551 81.5 2.1 91 1.5
2000/14/EC
DUH651 82 1.4 91.1 1.5
Vibration
Declared emission (m/s
2
) Uncertainty K (m/s
2
)
Applicable standard or
directive
Model
DUH551/DUH651 2.5 1.5 EN60745
Cd
Ni-MH
Li-ion
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DUH551 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUH551 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info