Manual Makita DUC204 (page 10 of 136) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690904

Zoom out

Zoom in

1/136

10 ENGLISH

WARNING:Thevibrationemissionduringactual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Cordless Chain saw safety warnings

1. Keep all parts of the body away from the saw

chain when the chain saw is operating. Before

you start the chain saw, make sure the saw

chain is not contacting anything. A moment of

inattention while operating chain saws may cause

entanglement of your clothing or body with the

saw chain.

2. Always hold the chain saw with your right

hand on the top handle and your left hand on

the front handle. Holding the chain saw with a

reversedhandcongurationincreasestheriskof

personalinjuryandshouldneverbedone.

3. Hold the power tool by insulated gripping

surfaces only, because the saw chain may con-

tact hidden wiring.Sawchainscontactinga"live"

wire may make exposed metal parts of the power

tool"live"andcouldgivetheoperatoranelectric

shock.

4. Wear safety glasses and hearing protection.

Furtherprotectiveequipmentforhead,hands,

legsandfeetisrecommended.Adequateprotec-

tiveclothingwillreducepersonalinjurybyying

debris or accidental contact with the saw chain.

5. Always keep proper footing.

When cutting a limb that is under tension be alert

for spring back.Whenthetensioninthewoodbres

is released the spring loaded limb may strike the

operator and/or throw the chain saw out of control.

7. Use extreme caution when cutting brush and

saplings.Theslendermaterialmaycatchthesaw

chain and be whipped toward you or pull you off

balance.

8. Carry the chain saw by the front handle with

the chain saw switched off and away from your

body. When transporting or storing the chain

saw always t the guide bar cover. Proper

handling of the chain saw will reduce the likelihood

of accidental contact with the moving saw chain.

9. Follow instructions for lubricating, chain ten-

sioning and changing accessories. Improperly

tensioned or lubricated chain may either break or

increase the chance for kickback.

10. Keep handles dry, clean, and free from oil and

grease. Greasy, oily handles are slippery causing

loss of control.

11. Cut wood only. Do not use chain saw for pur-

poses not intended. For example: do not use

chain saw for cutting plastic, masonry or non-

wood building materials. Use of the chain saw for

operations different than intended could result in a

hazardous situation.

12. Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the

guidebartouchesanobject,orwhenthewood

closes in and pinches the saw chain in the cut.

Tipcontactinsomecasesmaycauseasudden

reverse reaction, kicking the guide bar up and

back towards the operator. Pinching the saw chain

along the top of the guide bar may push the guide

bar rapidly back towards the operator. Either of

these reactions may cause you to lose control of

the saw which could result in serious personal

injury.Donotrelyexclusivelyuponthesafety

devices built into your saw. As a chain saw user,

you should take several steps to keep your cutting

jobsfreefromaccidentorinjury.

Kickback is the result of tool misuse and/or incor-

rect operating procedures or conditions and can be

avoided by taking proper precautions as given below:

• Maintainarmgrip,withthumbsandngers

encircling the chain saw handles, with both

hands on the saw and position your body

and arm to allow you to resist kickback

forces. Kickback forces can be controlled by

the operator, if proper precautions are taken.

Do not let go of the chain saw.

►Fig.1

• Donotoverreachanddonotcutabove

shoulderheight.Thishelpspreventunin-

tended tip contact and enables better control

of the chain saw in unexpected situations.

• Onlyusereplacementbarsandchainsspec-

iedbythemanufacturer.Incorrectreplace-

ment bars and chains may cause chain

breakage and/or kickback.

• Followthemanufacturer’ssharpeningand

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead

to increased kickback.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUC204 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 26,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUC204 Manual

Product: