Manual Makita DUC122 (page 20 of 104) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

599989

Zoom out

Zoom in

1/104

Take the filter out of the chain saw and remove small dust

or particles from it. When the filter is too dirty, replace it

with a new one. (Fig. 25)

Insert the battery cartridge into the tool.

Pull the switch trigger to flow built-up dust or particles off

the oil discharge hole by discharging chain oil. (Fig. 26)

Remove the battery cartridge from the tool.

Insert the cleaned oil filter into the oil discharge hole.

When the filter is too dirty, replace it with a new one.

(Fig. 27)

Insert the push nut with its correct side facing up as

shown in the figure into the oil discharge hole to secure

the filter. When the filter cannot be secured with a disfig-

ured push nut, replace the push nut with a new one.

(Fig. 28)

Reinstall the sprocket cover and saw chain on the tool.

Replacing the sprocket (Fig. 29 & 30)

Before fitting a new saw chain, check the condition of the

sprocket.

CAUTION:

• A worn sprocket will damage a new saw chain. Have

the sprocket replaced in this case. The sprocket need

to be installed so that it always faces as shown in the

figure.

Always fit a new locking ring when replacing the

sprocket.

Replacing carbon brushes (Fig. 31 & 32)

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take

out the worn carbon brushes, insert the new ones and

secure the brush holder caps.

Storing tool

Clean the tool before storing. Remove any chips and

sawdust from the tool after removing the sprocket cover.

After cleaning the tool, run it under no load to lubricate

the saw chain and guide bar.

Cover the guide bar with the scabbard.

Remove oil from the oil tank to empty it and place the

chain saw with the tank cap facing upward.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centres, always

using Makita replacement parts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DUC122 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DUC122 Manual

Product: