Manual Makita DTR181 (page 13 of 132) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

793624

Zoom out

Zoom in

1/132

13 ENGLISH

Combination of 3 rebars

#3 x #3

(10 mm x 10 mm)

#4 x #4

(13 mm x 13 mm)

#5 x #5

(16 mm x 16 mm)

#3 (10 mm)

#4 (13 mm)

#5 (16 mm)

#6 (19 mm)

#7 (22 mm)

#8 (25 mm)

* The combination is not designed for high tying strength.

Combination of 4 rebars

#3 x #3 (10 mm x 10 mm) #4 x #4 (13 mm x 13 mm)

#3 x #3 (10 mm x 10 mm)

#4 x #4 (13 mm x 13 mm)

#5 x #5 (16 mm x 16 mm)

NOTICE: If there is a gap between rebars or if the tool is used at an incorrect orientation, the rebars may not be

able to be tied.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Wear safety glasses.

Do not expose to rain.

Keep hands away from the wire reel or wire

when operating the tool.

Keep hands away from the tool tip.

Push the release lever before loading

the tie wire. Having installed the tie wire,

release the lock lever.

Ni-MH

Li-ion

Only for EU countries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

and batteries may have a negative impact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household waste!

In accordance with the European Directive

on waste electrical and electronic equipment

and on accumulators and batteries and

waste accumulators and batteries, as well as

their adaptation to national law, waste elec-

trical equipment, batteries and accumulators

should be stored separately and delivered

to a separate collection point for municipal

waste, operating in accordance with the

regulations on environmental protection.

This is indicated by the symbol of the crossed-

out wheeled bin placed on the equipment.

Intended use

The tool is intended for tying rebars.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745-2-18:

Sound pressure level (LpA) : 82 dB (A)

Sound power level (LWA) : 90 dB (A)

Uncertainty (K) : 3 dB (A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DTR181 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 38.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DTR181 Manual

Product: