600215
48
Zoom out
Zoom in
Previous page
1/92
Next page
48
ESPAÑOL (Instrucciones originales)
Explicación de los dibujos
1 Indicador rojo
2Botón
3 Cartucho de batería
4 Marca de estrella
5 Lámparas indicadoras
6 Botón de comprobación
7 Gatillo interruptor
8Lámpara
9 Visualizador LED
10 Botón de la lámpara
11 Palanca del interruptor de
inversión
12 Palanca de cambio de veloci-
dad
13 Marca de modo
14 Anillo de cambio del modo de
accionamiento
15 Flecha
16 Cambia en tres pasos
17 Duro
18 Medio
19 Blando
20 Botón de control
21 Capacidad de batería
22 Punta
23 Manguito
24 Adaptador de punta
25 Ranura
26 Gancho
27 Tornillo
28 Perno estándar
29 Torsión de apriete
30 Tiempo de apriete
31 Torsión de apriete apropiada
32 Perno de gran resistencia a la
tracción
ESPECIFICACIONES
Modelo DTP131 DTP141
Modo atornilla-
dor de impacto
Capacidades de
apriete
Tornillo para
metales
4mm–8mm
Perno estándar 5 mm – 14 mm
Perno de gran
resistencia a la
tracción
5mm–12mm
Velocidad sin carga (min
–1
)
(Blando / Medio / Duro)
0–1.400/0–2.200/
0–2.800
0–1.300/0–2.200/
0–2.700
Impacts por minuto
(Blando / Medio / Duro)
0–1.200/0–2.400/0–3.200
Bajo (1) / Alto (2)
Modo taladro de
percusión
Velocidad sin carga (min
–1
) 0 – 700 / 0 – 2.800 0 – 700 / 0 – 2.700
Golpes por minuto (min
–1
) 0 – 8.400 / 0 – 32.400
Capacidades de taladrado /
Hormigón
8mm
Modo taladro
Capacidades de
taladrado
Acero 10 mm / 6,5 mm
Madera 21 mm / 12 mm
Velocidad sin
carga (min
–1
)
0–700/0–2.800 0–700/0–2.700
Modo
atornillador
Capacidades de
apriete
Tornillo para
metales
3,5mm–6mm/4mm–6mm
Tornillo
autorroscante
4 mm, 5 mm / 4 mm (Grosor 3,2 mm máx.)
Velocidad sin
carga (min
–1
)
0 – 300 / 0 – 1.100
(depende del ajuste de torsión)
0–600/0–2.300(Modo P)
Cartucho de batería
BL1415/
BL1415N
BL1430/
BL1440/
BL1450
BL1815/
BL1815N/
BL1820/
BL1820B
BL1830/
BL1840/
BL1840B/
BL1850/
BL1850B
Peso neto 1,5 kg 1,7 kg 1,5 kg 1,8 kg
Tensión nominal CC 14,4 V CC 18 V
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DTP141 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DTP141 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info