Manual Makita DTP141 (page 11 of 92) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

600215

Zoom out

Zoom in

1/92

For drilling in wood, the best results are obtained with

wood drills equipped with a guide screw. The guide

screw makes drilling easier by pulling the bit into the

workpiece.

For drilling in metal, to prevent the bit from slipping when

starting a hole, make an indentation with a center-punch

and hammer at the point to be drilled. Place the point of

the bit in the indentation and start drilling.

Use a cutting lubricant when drilling metals. The excep-

tions are iron and brass which should be drilled dry.

NOTE:

• Choose suitable speed for the work load. Drilling over

the following capacity may damage the tool.

012989

Screwdriver mode “ ”

CAUTION:

• Adjust the number on the LED display to the proper

torque level for your work.

• Make sure that the driver bit is inserted straight in the

screw head, or the screw and/or bit may be damaged.

• Hold the tool firmly. When the clutch cuts in or refasten-

ing, a sudden twisting force may occur and it can twist

your wrist.

Place the point of the driver bit in the screw head and

apply pressure to the tool. Start the tool slowly and then

increase the speed gradually.

NOTE:

• This tool employs an electronic clutch. The tool stops

automatically when the clutch cuts in. To keep operat-

ing, release the switch trigger once.

• When driving wood screws, predrill pilot holes to make

driving easier and to prevent splitting of the workpiece.

See the chart.

006421

NOTE:

• See the following chart for the relation between the

number of torque setting and fastening torque rate.

The fastening torque rate will be different depends on

materials. Make a test fastening to get the desired

torque before operation.

012276

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and the bat-

tery cartridge is removed before attempting to perform

inspection or maintenance except for the following trou-

bleshooting related to the light.

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

•Screw bits

•Hook

• Plastic carrying case

• Makita genuine battery and charger

NOTE:

• Some items in the list may be included in the tool pack-

age as standard accessories. They may differ from

country to country.

Drilling capacity

High speed

Steel 6.5 mm

Wood 12 mm

Low speed

Steel 10 mm

Wood 21 mm

Nominal diameter of wood

screw (mm)

Recommended size of

pilot hole (mm)

3.1 2.0 – 2.2

3.5 2.2 – 2.5

3.8 2.5 – 2.8

4.5 2.9 – 3.2

4.8 3.1 – 3.4

5.1 3.3 – 3.6

5.5 3.7 – 3.9

5.8 4.0 – 4.2

6.1 4.2 – 4.4

Number

on LED

Display

Fastening torque rate

Low (1) High (2)

Approx. 2.5 N•m

(Approx. 25.5 kgf. cm)

Approx. 1.1 N•m

(Approx. 11.2 kgf. cm)

Approx. 4.6 N•m

(Approx. 46.9 kgf. cm)

Approx. 2.0 N•m

(Approx. 20.4 kgf. cm)

Approx. 8.1 N•m

(Approx. 82.6 kgf. cm)

Approx. 3.0 N•m

(Approx. 30.6 kgf. cm)

Approx. 10.0 N•m

(Approx. 102.0 kgf.

cm)

Approx. 4.0 N•m

(Approx. 40.8 kgf. cm)

Approx. 11.5 N•m

(Approx. 117.3 kgf. cm)

Approx. 5.8 N•m

(Approx. 59.1 kgf. cm)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DTP141 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DTP141 Manual

Product: