Manual Makita DST112 (page 7 of 68) (English, German, Dutch, Danish, French, Italian, Portuguese, Portuguese, Spanish)

657991

Zoom out

Zoom in

1/68

7 ENGLISH

Indicator lamps Remaining

capacity

Lighted Off Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

Thebattery

may have

malfunctioned.

NOTE:Dependingontheconditionsofuseandthe

ambienttemperature,theindicationmaydifferslightly

fromtheactualcapacity.

Indicating the remaining battery

capacity

Country specic

When you either pull the switch trigger or push the con-

tact element, the battery indicator shows the remaining

battery capacity.

►Fig.3: 1. Battery indicator

Theremainingbatterycapacityisshownasthefollow-

ing table.

Battery indicator status Remaining

battery

capacity

Off

Blinking

50% - 100%

20% - 50%

0% - 20%

Charge the

battery

Switch action

CAUTION: Before installing the battery car-

tridge into the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released.

CAUTION: When not operating the tool,

depress the trigger-lock button from B side to

lock the switch trigger in the OFF position.

►Fig.4: 1.Trigger-lockbutton2. Switch trigger

►Fig.5

Topreventtheswitchtriggerfromaccidentallypulled,

the trigger-lock button is provided.

Topulltheswitchtrigger,depressthetrigger-lockbutton

fromAside.

Afteruse,alwayspressinthetrigger-lockbuttonfrom

B side.

Lighting up the lamp

CAUTION: Do not look in the light or see the

source of light directly.

►Fig.6: 1. Lamp

Pulltheswitchtriggeroractuatethecontactelementto

lightupthelamp.Thelampkeepsonlightingwhilepull-

ing the switch trigger or actuating the contact element.

Thelampgoesoutapproximately10secondsafter

releasing the switch trigger and the contact element.

NOTE:Useadryclothtowipethedirtoffthelensof

thelamp.Becarefulnottoscratchthelensoflamp,or

it may lower the illumination.

ASSEMBLY

CAUTION: Always make sure that the battery

cartridge is removed before carrying out any work

on the stapler.

Staples

CAUTION: Do not use staples other than

designated in this manual or staples that appear

to be damaged, bent, rusty or corroded.

CAUTION: Load the same type, size and

uniform length of staples when loading multiple

strips of staples in the magazine.

NOTICE: Handle the staples and their box care-

fully. If the staples have been handled roughly,

they may be bent out of shape, causing poor

staple feed or jamming.

NOTICE: Avoid storing the staples in a very

humid or hot place or place exposed to direct

sunlight.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DST112 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 16,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DST112 Manual

Product: