Manual Makita DSC251 (page 9 of 26) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691890

Zoom out

Zoom in

1/26

9 ENGLISH

4. Under abusive conditions, liquid may be

ejected from the battery; avoid contact. If con-

tact accidentally occurs, ush with water. If

liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause

irritation or burns.

CAUTION

1. Hold the tool securely while it is in use.

· If the tool is not held securely, you may be injured.

2. Keep your hands and face away from the mov-

ing parts.

· They may cause an injury.

3. Release the Switch immediately to stop opera-

tion when the tool is out of order or makes an

abnormal sound during use.

Have it inspected and repaired by an autho-

rized service center.

· Failure to do so may result in damage or injury.

4. If you drop or strike the tool, check carefully

that the body is not damaged, cracked, or

deformed.

· Any such damage could cause injury.

5. Do not short the battery. A battery short can

cause a large current ow, overheating, pos-

sible burns and even a breakdown.

· Do not touch the terminals with any conductive

materials.

· Avoid storing battery in a container with other

metal objects such as nails, coins, etc.

· Do not expose battery to water or rain.

· Do not cut the cord.

6. Do not operate the tool or charge the battery in

explosive atmospheres, such as in the presence

of lacquer, paint, benzin, thinner, gasoline, gasses

or adhesive. This may cause an explosion or re.

7. Do not charge the battery on paper, cardboard,

cloth, cushions, mats, carpets, vinyl or in the pres-

ence of dust. This may cause re.

8. Do not expose the Charger to water or metal items

that can short out the charging terminals.

9. Do not use charger for any other purpose than

charging the battery.

10. Make sure tipped saw blades have no chips or

cracks before using the tool.

11. Do not use water or cutting oil when cutting.

12. Use only Makita genuine tipped saw.

13. Do not leave the tool on the oor with switch

locked on. The tool will run continuously and it

may cause personal injury.

14. Do not operate the tool close to ammable and

fragile items or personnel not necessary to the

operation. During cutting hot debris and sparks will

be ejected from the tool which may cause damage

to the surroundings, re or personal injury.

15. Do not cut concrete. It causes damage to the tool

and may result in personal injury.

16. Check for the presence of people on the ground

during operation in an elevated place. Any materi-

als or tools dropped may cause an accident.

17. If during charging, there is an abnormal generation

of heat, stop charging immediately by disconnect-

ing the battery. Continuing charging may cause

smoke, re or explosion.

18. Do not allow anything to cover or clog the motor

vents.

This may cause the motor to overheat.

19. When using an extension cord with the charger,

it is recommended to use a cord with the cross

section below and with a length as short as pos-

sible. For charging outdoors, use a cord rated for

outdoor use.

Relation between usable cord thickness and maximum

length

Cord size

(Nominal cross sectional area of

conductor)

Maximum cord

length

0.75 mm

20 m

1.25 mm

30 m

WARNING FOR USING

TIPPED SAW

Work area safety

1. Ensure the Dust Bag is xed correctly. Without the

Dust Bag, when Tipped Saw Blades are damaged,

pieces of the blades y off and can cause serious

personal injury.

2. Keep bystanders away from operations. Even with

the Dust Bag tted, damaged blades or hot debris

can y out of the bag, resulting in serious personal

injury.

3. Sparking may occur when cutting with Tipped Saw

Blades. Do not use the tool where there is the risk

of re or explosion.

4. Cutting with Tipped Saw Blades is noisy. Consider

the work area environment.

Dress and protective equipment

5. Wear protective equipment; safety glasses, safety

shoes, dust mask and helmet. Even with the Dust

Bag tted, damaged blades or hot debris can y

out of the cover, resulting in personal injury.

6. Dress properly. Do not wear a tie, loose clothing or

knit gloves. Keep hair covered with a hair cover or

a cap to be away from rotating blades.

Before use

7. Ensure that Tipped Saw Blades are not deformed,

chipped, cracked or worn-out. Do not use a Tipped

Saw if any damage or wear is found. Cutting under

such conditions may cause further damage to the

blades and serious personal injury.

8. Do not use the Tipped Saw for any application

other than that stated in the tool specication.

Using the Tipped Saw for other applications can

cause excessive wear, detachment of blades, low

cutting performance and abnormal generation of

heat, resulting in damage to the blades and seri-

ous personal injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DSC251 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 7,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DSC251 Manual

Product: