Manual Makita DMR112 (page 11 of 102) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690927

Zoom out

Zoom in

1/102

11 ENGLISH

4. Optimum Bluetooth streaming range is roughly 10

meters (30 feet) (line of sight) to the radio but distance

up to 30 meters (100 feet) are possible.

5. If Bluetooth connection is lost due to exceeding time of

separation, exceeding the optimum distance, obstacles

or otherwise, reconnecting your device with the radio

may be necessary.

6. Physical obstacles, other wireless devices or

electromagnetic devices may affect the connection

quality.

7. Bluetooth connectivity performance may vary

depending on the connected Bluetooth devices.

Please refer to the Bluetooth capabilities of your device

before connecting to the radio. All features may not be

supported on some paired Bluetooth devices.

Playing audio les in Bluetooth mode

When you have successfully connected the radio with the

chosen Bluetooth device you can start to play your music

using the controls on your connected Bluetooth device.

1. Once playing has started adjust the volume to the

required setting using the Volume knob on the radio or

on your enabled Bluetooth device.

2. Use the controls on your device to play/pause and

navigate tracks.

NOTE:

1. That not all player applications or devices may respond

to all of these controls.

2. Some mobile phones may temporarily disconnect

from the radio when you make or receive calls. Some

devices may temporarily mute their Bluetooth audio

streaming when they receive text messages, emails or

for other reasons unrelated to audio streaming. Such

behaviour is a function of the connected device and

does not indicate a fault with the radio.

Playing a previously-paired Bluetooth

source device

The radio can memorize up to 8 sets of paired device,

when the memory exceed this amount, the oldest

pairing history will be over written. If your Bluetooth

device already paired with the radio previously, the unit

will memorize your Bluetooth device and it attempts

to reconnect with a device in memory which is last

connected. If the last connected device is not available,

the radio will be discoverable.

Disconnecting your Bluetooth device

Press and hold the Bluetooth pairing button for 2-3

seconds to disconnect with your Bluetooth device. The

Bluetooth indicator on the Preset buttons ashes in blue

indicating the radio is discoverable again for pairing.

AUXILIARY INPUT SOCKET

Two 3.5 mm stereo Auxiliary Input sockets are provided.

One is at the front of your radio (AUX IN 1); the other is

located in the battery compartment (AUX IN 2).

1. Connect an external audio source (for example, iPod,

MP3 or CD player) to the Auxiliary Input socket by

audio cord.

2. Repeatedly press and release the Band button until

“AUX IN 1” or “AUX IN 2” is displayed, then AUX

function is activated.

3. To have the better sound quality, we recommend

setting the volume to more than two-thirds level on your

audio device and then adjust the volume on the radio

as required.

NOTE:

Audio cord is not included as standard accessories.

MISCELLANEOUS SETTINGS

Language options

There are eight language options available in the

radio: English, German, Italian, French, Dutch, Danish,

Norwegian and Spanish.

1. Press Advanced setting button.

2. Rotate the Volume/Tuning Control/Select knob until

“Language” shown on the display. Press the Volume/

Tuning Control/Select knob to enter the setting.

3. Rotate the Volume/Tuning Control/Select knob to

choose your desired language. Press the Volume/

Tuning Control/Select knob to conrm your setting.

Brightness control

The button Light can be adjusted.

1. Press the Advanced setting button.

2. Rotate the Volume/Tuning Control/Select knob until

“Button Light” is shown on the display. Press the

Volume/Tuning Control/Select knob to enter the setting.

3. Rotate the Volume/Tuning Control/Select knob to

choose "On" or "Off" to enable or disable the button

light function, then press the Volume/Tuning Control/

Select knob to conrm the setting.

System reset

If your radio fails to work correctly, or some digits on the

display are missing or incomplete, carry out the following

procedure.

1. Press the Advanced setting button.

2. Rotate the Volume/Tuning Control/Select knob until

“Factory Reset” shown on the display. Press the

Volume/Tuning Control/Select knob to enter the setting.

3. Rotate the Volume/Tuning Control/Select knob to choose

“Yes”. Press the Volume/Tuning Control/Select knob to

conrm the setting and a full reset will be performed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DMR112 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DMR112 Manual

Product: