793617
8
Zoom out
Zoom in
Previous page
1/64
Next page
8ENGLISH

the blade clamp lever (part of the blade clamp sleeve)
is in released position before inserting the recipro saw

the blade clamp lever in the direction of the arrow so
that it can be locked at the released positon.
Fig.5: 1. Blade clamp lever 2. Fixed position
3. Released position
Insert the recipro saw blade into the blade clamp as far

the recipro saw blade. Make sure that the recipro saw

it out.
Fig.6: 1. Recipro saw blade 2. Blade clamp sleeve
CAUTION: If you do not insert the recipro saw
blade deep enough, the recipro saw blade may be
ejected unexpectedly during operation. This can

To remove the recipro saw blade, rotate the blade
-
pro saw blade is removed and the blade clamp lever is

Fig.7: 1. Recipro saw blade 2. Blade clamp lever
3. Fixed position 4. Released position
CAUTION: 
the lever during the switching operation. Failure
to do so may cause personal injuries.
NOTE:

be locked in the released position. In this case, rotate

the blade clamp lever locked at the released position.
NOTE: If the blade clamp lever is positioned inside


before installing or removing the recipro saw blade.
Hook
Optional accessory
CAUTION: When installing the hook, always
 If not, the hook
󰀨

CAUTION: When hanging the tool, set the
󰀨 position to lock the switch
trigger. (See the section for switch action.)
CAUTION: Never hang the tool at high or
potentially unstable location.
CAUTION: Do not hook the tool on your belt
or other accessories.

CAUTION: Use the hanging/mounting parts
for their intended purposes only. Using for unin-


Fig.8: 1. Groove 2. Screw 3. Hook

This can be installed on either side of the tool.
To install the hook, insert it into a groove in the tool
housing on either side and then secure it with a screw.
To remove, loosen the screw and then take it out.
OPERATION
CAUTION: 
against the workpiece during operation. If the

during operation, strong vibration and/or twisting will

CAUTION: Always wear gloves to protect

metal.
CAUTION: Be sure to always wear suitable
eye protection which complies with current
national standards.
CAUTION: Always use a suitable coolant
(cutting oil) when cutting metal. Failure to do so will
cause premature blade wear.
CAUTION: Do not quirk the blade during
cutting.

allow the tool to bounce. Bring the recipro saw blade
into light contact with the workpiece. First, make a pilot
groove using a slower speed. Then use a faster speed
to continue cutting.
Fig.9
NOTICE: Do not cut the workpiece with the shoe
away from the workpiece. Doing so increases the

MAINTENANCE
CAUTION: Always be sure that the tool is
󰀨
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,



8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DJR189 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DJR189 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 14.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info