600416
3
Zoom out
Zoom in
Previous page
1/44
Next page
3
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Shoe
3-2. Shoe button
4-1. Shoe button
4-2. Shoe
5-1. Lock-off button
5-2. Switch trigger
6-1. Lamp
7-1. Hook
8-1. Blade clamp sleeve
8-2. Released position
8-3. Fixed position
9-1. Blade
10-1. Blade clamp lever
12-1. Limit mark
13-1. Brush holder cap
13-2. Screwdriver
SPECIFICATIONS
Model DJR181 DJR182
Length of stroke 28 mm
Strokes per minute(min
-1
) 0 - 2,900
Pipe 130 mm
Max. cutting capacities
Wood 255 mm
Overall length 499 mm 449 mm
Net weight 3.7 kg 3.6 kg
Rated voltage D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE020-1
Intended use
The tool is intended for sawing wood, plastic and ferrous
materials.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DJR181
Sound pressure level (L
pA
) : 86 dB (A)
Sound power level (L
WA
) : 97 dB (A)
Uncertainty (K) : 3 dB (A)
Model DJR182
Sound pressure level (L
pA
) : 85 dB (A)
Sound power level (L
WA
) : 96 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model DJR181
Work mode : cutting boards
Vibration emission (a
h,B
) : 12.5 m/s
2
Uncertainty (K) : 2.0 m/s
2
Work mode : cutting wooden beams
Vibration emission (a
h,WB
) : 14.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DJR182
Work mode : cutting boards
Vibration emission (a
h,B
) : 14.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting wooden beams
Vibration emission (a
h,WB
) : 12.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DJR181 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DJR181 in the language / languages: English, German, Polish as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita DJR181

Makita DJR181 User Manual - English, Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info