Manual Makita DHS783 (page 22 of 156) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691830

Zoom out

Zoom in

1/156

22 ENGLISH

MAINTENANCE

CAUTION:

Always be sure that the tool is

switched off and the battery cartridge is removed before

attempting to perform inspection or maintenance.

CAUTION:

Clean out the upper and lower guards

to ensure there is no accumulated sawdust which may

impede the operation of the lower guarding system. A

dirtyguardingsystemmaylimittheproperoperationwhich

couldresultinseriouspersonalinjury.Themosteffective

waytoaccomplishthiscleaningiswithcompressedair.If

the dust is being blown out of the guards, be sure the

proper eye and breathing protection is used.

CAUTION: After each use, wipe off the saw

dust on the tool.Finesawdustmaycomeinsidethe

toolandcausemalfunctionorare.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

To maintain product SAFETY and RELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

beperformedbyMakitaAuthorizedorFactoryService

Centers,alwaysusingMakitareplacementparts.

Adjusting 0°-cut or 45°-cut accuracy

Thisadjustmenthasbeenmadeatthefactory.Butifitis

off,youcanadjustitasthefollowingprocedure.

1. Loosen the clamping screws on the front and rear

of the tool so that the bevel angle can be changed. Set

thestopperto0°-45°bevelanglepositionifyouare

goingtoadjust45°-cutaccuracy.

►Fig.47: 1. Stopper

Make the base perpendicular or 45° to the circular saw

bladeusingatriangularrulebyturningtheadjustingscrewwitha

hexwrench.Youcanalsouseasquareruletoadjust0°angle.

►Fig.48: 1. Triangular rule

►Fig.49: 1.Adjustingscrewfor0°angle2.Adjusting

screw for 45° angle

3. Tighten the clamping screws and then make a test

cut to check if desired angle is obtained.

Adjusting the parallelism

CAUTION: Keep the parallelism accurate.

Otherwisethecircularsawblademaybiteintothe

guiderailandthedamagedguiderailmaycausean

injury.

Thisadjustmenthasbeenmadeatthefactory.Butifitis

off,youcanadjustitasthefollowingprocedure.

1. Set the tool to the maximum cutting depth.

2. Make sure all levers and screws are tightened.

3. Loosenthescrewsshowninthegure.

4. Whileopeningthelowerguard,movetherearof

the base so that the distance A and B becomes equal.

►Fig.50: 1. Screw 2. Base

5. Tighten the screws and make a test cut to check

the parallelism.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual.Theuseofanyother

accessories or attachments might present a risk of

injurytopersons.Onlyuseaccessoryorattachment

for its stated purpose.

Ifyouneedanyassistanceformoredetailsregard-

ingtheseaccessories,askyourlocalMakitaService

Center.

• Circular saw blade

• Ripfence(Guiderule)

• Hook

• Guide rail

• Bevel guide

• Clamp

• Sheet

• Rubber sheet

• Position sheet

• Dustnozzle

• Hex wrench

• Wirelessunit(forDHS783)

• Makitagenuinebatteryandcharger

NOTE:Someitemsinthelistmaybeincludedinthe

toolpackageasstandardaccessories.Theymay

differfromcountrytocountry.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DHS783 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 29,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DHS783 Manual

Product: