Manual Makita DHS783 (page 19 of 156) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691830

Zoom out

Zoom in

1/156

19 ENGLISH

Tool registration for the vacuum

cleaner

NOTE: A Makita vacuum cleaner supporting the

wireless activation function is required for the tool

registration.

NOTE: Finish installing the wireless unit to the tool

before starting the tool registration.

NOTE: During the tool registration, do not pull the

switch trigger or turn on the power switch on the

vacuum cleaner.

NOTE: Refer to the instruction manual of the vacuum

cleaner, too.

Ifyouwishtoactivatethevacuumcleaneralongwith

theswitchoperationofthetool,nishthetoolregistra-

tion beforehand.

1. Install the batteries to the vacuum cleaner and the

tool.

2. Setthestand-byswitchonthevacuumcleanerto

"AUTO".

►Fig.39: 1.Stand-byswitch

3. Press the wireless activation button on the vac-

uum cleaner for 3 seconds until the wireless activation

lamp blinks in green. And then press the wireless acti-

vationbuttononthetoolinthesameway.

►Fig.40: 1.Wirelessactivationbutton2.Wireless

activation lamp

If the vacuum cleaner and the tool are linked success-

fully,thewirelessactivationlampswilllightupingreen

for 2 seconds and start blinking in blue.

NOTE:Thewirelessactivationlampsnishblinking

in green after 20 seconds elapsed. Press the wireless

activation button on the tool while the wireless acti-

vation lamp on the cleaner is blinking. If the wireless

activation lamp does not blink in green, push the wire-

lessactivationbuttonbrieyandholditdownagain.

NOTE:Whenperformingtwoormoretoolregistra-

tionsforonevacuumcleaner,nishthetoolregistra-

tiononebyone.

Starting the wireless activation

function

NOTE: Finish the tool registration for the vacuum

cleaner prior to the wireless activation.

NOTE: Refer to the instruction manual of the vacuum

cleaner, too.

After registering a tool to the vacuum cleaner, the

vacuumcleanerwillautomaticallyrunsalongwiththe

switch operation of the tool.

1. Install the wireless unit to the tool.

Connect the hose of the vacuum cleaner with the tool.

►Fig.41

3. Setthestand-byswitchonthevacuumcleanerto

"AUTO".

►Fig.42: 1.Stand-byswitch

4. Push the wireless activation button on the tool

briey.Thewirelessactivationlampwillblinkinblue.

►Fig.43: 1.Wirelessactivationbutton2.Wireless

activation lamp

5. Pull the switch trigger of the tool. Check if the

vacuum cleaner runs while the switch trigger is being

pulled.

To stop the wireless activation of the vacuum cleaner,

push the wireless activation button on the tool.

NOTE: The wireless activation lamp on the tool will

stop blinking in blue when there is no operation for

2hours.Inthiscase,setthestand-byswitchonthe

vacuum cleaner to "AUTO" and push the wireless

activation button on the tool again.

NOTE:Thevacuumcleanerstarts/stopswithadelay.

There is a time lag when the vacuum cleaner detects

a switch operation of the tool.

NOTE: The transmission distance of the wireless unit

mayvarydependingonthelocationandsurrounding

circumstances.

NOTE:Whentwoormoretoolsareregisteredtoone

vacuumcleaner,thevacuumcleanermaystartrun-

ningevenifyoudon'tpulltheswitchtriggerbecause

another user is using the wireless activation function.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DHS783 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 29,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DHS783 Manual

Product: