600438
6
Zoom out
Zoom in
Previous page
1/104
Next page
6
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
Specifications and battery cartridge may differ from country to country.
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
ENE048-1
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS GRINDER SAFETY
WARNINGS
GEB059-3
Safety Warnings Common for Grinding, Sanding, Wire
Brushing, or Abrasive Cutting-Off Operations:
1. This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
2. Operations such as polishing are not
recommended to be performed with this power
tool. Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
3. Do not use accessories which are not specifically
designed and recommended by the tool
manufacturer. Just because the accessory can be
attached to your power tool, it does not assure safe
operation.
4. The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool. Accessories running faster than their rated
speed can break and fly apart.
5. The outside diameter and the thickness of your
accessory must be within the capacity rating of
your power tool. Incorrectly sized accessories
cannot be adequately guarded or controlled.
6. Threaded mounting of accessories must match
the grinder spindle thread. For accessories
mounted by flanges, the arbour hole of the
accessory must fit the locating diameter of the
flange. Accessories that do not match the mounting
1. Button
2. Red indicator
3. Battery cartridge
4. Lock-off lever
5. Switch lever
6. Battery indicator
7. Mode indicator
8. Shaft lock
9. Wheel guard
10. Bearing box
11. Screw
12. Lever
13. Lock nut
14. Depressed center wheel
15. Inner flange
16. Lock nut wrench
17. Ezynut
18. Abrasive wheel
19. Spindle
20. Arrow
21. Notch
22. Flex wheel
23. Plastic pad
24. Sanding lock nut
25. Abrasive disc
26. Rubber pad
27. Abrasive cut-off wheel/diamond
wheel
28. Wheel guard for abrasive cut-off
wheel/diamond wheel
29. Abrasive cut-off wheel
30. Diamond wheel
31. Thickness: Less than 4 mm (5/32”)
32. Thickness: 4 mm (5/32”) or more
33. Wire cup brush
34. Wire wheel brush
35. Exhaust vent
36. Inhalation vent
37. Dust cover
Model DGA405 DGA455 DGA505
Wheel diameter 100 mm (4”) 115 mm (4-1/2”) 125 mm (5”)
Max. wheel thickness 6 mm (1/4”) 6 mm (1/4”) 6 mm (1/4”)
Spindle thread M10 M14 or 5/8” (country specific)
Rated speed (n)/No load speed (n
0
) 8,500 min
-1
Overall length
With battery cartridge BL1815N, BL1820 348 mm
With battery cartridge BL1830, BL1840, BL1850 362 mm
Net weight
With battery cartridge BL1815N, BL1820 2.2 kg 2.3 kg 2.3 kg
With battery cartridge BL1830, BL1840, BL1850 2.4 kg 2.5 kg 2.6 kg
Rated voltage D.C. 18V
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DGA455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DGA455 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 11,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info