793614
13
Zoom out
Zoom in
Previous page
1/124
Next page
13 ENGLISH
Settings menu
The following settings menu options are available in the settings menu window.
Level 1 Level 2 Level 3 Level 4
Start menu (start
screen) PIN code menu Select menu
“Total Job” menu Total job settings
* Not available for this tool
“Manual Mode” menu Job settings
“History” menu History settings
“Network” menu Network settings
“PIN” menu PIN settings
PIN code menu
Fig.10
1. On the start screen press and hold the right arrow
button to display the PIN code menu.
2. Enter the PIN codes to display the select menu.
NOTE: The default PIN codes are “0000”.
Button Action Application
Press Change digit position.
Press Change setting values.
Press and hold 
Press and hold Return to start screen
Select menu
Fig.11
Select one of the menu options on the screen after you
enter the PIN successfully.
Press the up or down arrow button to scroll the select
menu screen. Then press the right arrow button to
display your preferred settings menu.
Total job settings
* This settings menu is not available for this tool.
Job settings
Fig.12: 1. Job number you select 2. Total job num-
bers stored in tool memory
Select one of the jobs previously saved in the tool
memory.
Button Action Application
Press Change setting values.
Press and hold 
History settings
Fig.13: 1. Total numbers of screws you have fas-
2. Total
numbers of screws you have fastened after
previous maintenance
Learn your job history.
NOTE: Accumulated maintenance count can be
reset in your accordance in the application software
designed for this tool.
Network settings
Fig.14

PIN settings
Fig.15
Renew your PIN codes if the need arises.
Button Action Application
Press Change digit position.
Press Change setting values.
Press and hold 
Press and hold Return to start screen
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DFT120T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DFT120T in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 18.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info