691711
35
Zoom out
Zoom in
Previous page
1/60
Next page
35
Indicador de capacidad de batería restante
(solamente para modelos con batería BL1430A)
La batería BL1430A está equipada con el indicador de
capacidad de batería restante.
Comprobación de la capacidad de batería restante
(Fig. 2)
Cuando se está cargando
Cuando comience la carga, la primera (extremo
izquierdo) lámpara de indicación comenzará a
parpadear. Después, a medida que prosiga la carga, las
otras lámparas se iluminarán, una después de otra, para
indicar la capacidad de batería.
Cuando se está utilizando
Cuando la herramienta esté encendida, las lámparas se
iluminarán para indicar la capacidad de batería restante.
Cuando la herramienta sea apagada, las lámparas se
apagarán después de unos 5 segundos.
Cuando la herramienta sea utilizada con una batería que
no ha sido utilizada durante largo tiempo y sea
encendida, es posible que no se ilumine ninguna
lámpara. Utilice un adaptador de refresco Makita para
refrescar la batería.
Accionamiento del interruptor (Fig. 3)
PRECAUCIÓN:
Antes de instalar el cartucho de batería en la
herramienta, compruebe siempre para cerciorarse de
que el gatillo interruptor se acciona debidamente y que
vuelve a la posición “OFF” cuando lo suelta.
Para poner en marcha la herramienta, simplemente
apriete el gatillo interruptor. Suelte el gatillo interruptor
para parar.
Accionamiento del interruptor inversor (Fig. 4)
PRECAUCIÓN:
Confirme siempre la dirección de giro antes de iniciar
la operación.
Utilice el interruptor inversor solamente después de
que la herramienta se haya parado completamente. Si
cambia la dirección de giro antes de que la
herramienta se haya parado podrá dañarla.
Cuando no está utilizando la herramienta, ponga
siempre el interruptor inversor en la posición neutral.
Esta herramienta tiene un interruptor inversor para
cambiar la dirección de giro. Presione hacia dentro el
interruptor inversor del lado A para giro hacia la derecha
o del lado B para giro hacia la izquierda.
Cuando el interruptor inversor está en la posición
neutral, no se podrá apretar el gatillo interruptor.
Encendido de las lámparas (Fig. 5)
PRECAUCIÓN:
No mire a la luz ni vea la fuente de luz directamente.
Apriete el gatillo interruptor para encender la lámpara. La
lámpara seguirá encendida mientras el gatillo interruptor
esté siendo apretado. La luz se apagará
automáticamente 10 segundos después de soltar el
gatillo interruptor.
NOTA:
Utilice un paño seco para quitar la suciedad de la lente
de la lámpara. Tenga cuidado de no rayar la lente de la
lámpara, porque podrá disminuir la iluminación.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DFT044F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DFT044F in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info