Manual Makita DFR540 (page 7 of 48) (German, Polish)

600456

Zoom out

Zoom in

1/48

the table below for the relation between the number

indicated on the label on feeder box and the respective

screw length.

For Models DFR540, DFR550

25 mm

30 mm

35 mm

40 mm

45 mm

50 mm

55 mm

Number indicated on the label Screw length

008238

For Model DFR750

Number indicated on the label Screw length

45 mm

50 mm

55 mm

60 mm

65 mm

70 mm

75 mm

008241

Adjusting the driving depth

Fig.4

Depress the stopper base as far as it will go. While

keeping it in this position, turn the adjusting knob until the

bit tip projects approx. 5 mm from the stopper base. Drive

a trial screw. If the screw head projects above the surface

of the workpiece, turn the adjusting knob in the "A"

direction; if the screw head is counter-sunk, turn the

adjusting knob in the "B" direction.

Switch action

Fig.5

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger actuates

properly and returns to the "OFF" position when

released.

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

Reversing switch action

Fig.6

This tool has a reversing switch to change the direction of

rotation. Depress the reversing switch lever from the A

side for clockwise rotation or from the B side for

counterclockwise rotation.

When the reversing switch lever is in the neutral position,

the switch trigger cannot be pulled.

CAUTION:

• Always check the direction of rotation before

operation.

• Use the reversing switch only after the tool comes

to a complete stop. Changing the direction of

rotation before the tool stops may damage the tool.

• When not operating the tool, always set the

reversing switch lever to the neutral position.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out

any work on the tool.

Installing or removing the bit

Loosen the thumb screws which secure the casing. Pull

out the casing in the direction of the arrow.

Fig.7

Press the dust cover toward the plane bearing and pull

out the bit. If the dust cover cannot be moved as far as

the plane bearing, try it again after turning the bit slightly.

To install the bit, insert it into the socket while turning it

slightly. After installing, always make sure that the bit is

securely held in place by trying to pull it out.

Fig.8

Installing screw strip

Insert the screw strip through the screw guide. Then

insert it through the feeder box until the first screw

reaches the position next to the driving position.

Fig.9

Fig.10

Removing screw strip

To remove the screw strip, just pull it out in the direction

of the arrow. If you depress the reverse button, you can

pull out the screw strip in the reverse direction of the

arrow.

Fig.11

Fig.12

Folding screw guide

Fig.13

Screw guide is foldable. Folding the screw guide allows

space used for storage to be minimal.

Carry hook

The carry hook is convenient for temporarily hooking the

tool. It can be installed on either side of the tool.

When removing the carry hook, widen it by pressing its

right ends ON BOTH SIDES in the directions of arrow (1)

and raise it in the direction of the arrow (2).

Fig.14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DFR540 in the language / languages: German, Polish as an attachment in your email.

The manual is 2,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita DFR540

Makita DFR540 User Manual - English, Dutch - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DFR540 Manual

Product: