448349
10
Zoom out
Zoom in
Previous page
1/54
Next page
10
D
- Lead the chain (F/8) around the sprocket nose (F/10) of the
guide bar.
NOTE: The chain should be easy to pull in the direction of the
arrow. The clutch drum (E/9) should turn with the chain (the
sprocket engages the chain).
- Put the saw chain (E/8) onto the sprocket behind the clutch
cylinder (E/9) and insert the saw chain into the guide groove
of the guide bar. The cutting edges of the top side of the bar
must be oriented in the direction of the arrow.
- Position the guide bar. Take care that the pivot (C/7) of the
chain tightener is inserted into the bore (see circle) of the
guide bar.
- Turn the chain adjusting screw (C/6) to the left (counter-
clockwise) until the pin (C/7) is at the left stop.
- Remove adhesive label (A/4).
- Unscrew retaining nut (B/4).
- Pull off the sprocket guard (B/1).
CAUTION: When working on the guide bar or saw chain
always wear protective gloves and pull out
the power supply plug.
CAUTION: Switch on the electric chain saw only after
having assembled it completely and inspected!
A
2
B
C
6
7
1
8
9
E
F
10
8
- If the hand guard (A/2) can be easily pulled about 2 cm
(1") in the direction shown by the arrow, the chain brake
has already been released. If this is not the case, pull the
hand guard (A/2) firmly in the direction of the arrow until
you feel it catch.
PUTTING INTO OPERATION
Mounting the guide bar and saw chain
Use the universal wrench delivered with the machine.
Put the electric chain saw on a stable surface and carry out the
following operations for mounting the bar and chain:
Always release the chain brake before removing or replac-
ing the sprocket guard (A/1).
1
4
4
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DES 380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DES 380 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita DES 380

Makita DES 380 User Manual - German, Danish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info