1) Figures derived in equal part from idle, full-load, and top-speed operation.
2) At max. power
•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
•Specifications may differ from country to country.
•The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.
•The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
•The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.
•Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
Denomination of components
1.Rear handle
2.Safety locking button (throttle lock)
3.Throttle lever
4.Hand guard (release for chain brake)
5.Chain
6.Guide bar
7.Guide bar case
8.Retaining nuts
9.Chain catch (safety device)
10.Sprocket cover
11.Muffler
12.Spark plug
13.Front grip (tubular handle)
14.Starter grip
15.I/STOP-switch (short-circuit switch)
16.Carabiner or rope attachment point
17.Oil tank cap
18.Fan housing with starting assembly
19.Fuel tank cap
20.Air filter cover
21.Choke lever
22.Primar pump
Stroke volume cm
3
22.2
Bore mm33
Stroke mm26
Max. power at speed kW/min
-1
0.74/8,000
Max. torque at speedNm/min
-1
0.97/6,500
Idling speed / max. engine speed with bar and chain min
-1
3,000/11,500 (DCS230T),
3,000/10,500 (DCS231T)
3,000/10,000 (DCS232T)
Coupling speedmin
-1
4,500
Sound pressure level at the workplace L
pA
av
per ISO 22868
1)
dB (A)95.0
Sound power level L
WA, Fl+Ra
per ISO 22868
1)
dB (A)105.8
Uncertainty for noisedB (A)K: 2.5
Vibration acceleration a
h
,
w
av
per ISO 22867
1)
- Tubular handle m/s
2
6.0
- Rear handlem/s
2
5.0
Uncertainty for vibrationm/s
2
K: 2.0
Carburetor (diaphragm carburetor) TypeWalbo WYL
Ignition system Typeelectronic
Spark plug TypeNGK CMR 6A
Electrode gapmm0.6–0.7
Fuel consumption at max. load per ISO 7293 kg/h0.41
Specific consumption at max. load per ISO 7293 g/kWh561
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Makita DCS231T at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Makita DCS231T in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.
The manual is 3,56 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
