690516

Makita DCL181F Manual

10
Zoom out
Zoom in
Previous page
1/19
Next page
10 ENGLISH
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Type of lter
Normal lter
►Fig.7: 1. Capsule 2.Prelter3. Filter
High performance lter
►Fig.8: 1. Capsule 2.Highperformancelter
Disposing of dust
CAUTION: Empty the cleaner before it
becomes too full, or the suction force weakens.
CAUTION: Be sure to empty out the dust
inside the cleaner itself. Failure to do so may
cause the lter to be clogged or the motor to be
damaged.
Disposing of dust for normal lter
1. Inordertodropduststickingonthelterinthe
capsule, tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
►Fig.9: 1. Capsule 2.Suctioninlet
NOTE: Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
2. Remove accumulated dust from inside of capsule
andoffofprelter.
►Fig.10: 1.Prelter2. Capsule
3. Twistprelterindirectionofarrowtounfasten
securinglipfromcleanerunitandthenpulloffprelter.
►Fig.11: 1.Prelter2.Securinglip
4. Cleanoutnedustfromprelter.Next,remove
lter,andlightlytaptodislodgedust.
►Fig.12: 1.Prelter2. Filter
Disposing of dust for high
performance lter
1. Inordertodropduststickingonthelterinthe
capsule, tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
►Fig.13: 1. Capsule 2.Suctioninlet
NOTE: Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
2. Remove accumulated dust from inside of capsule
andoffofhighperformancelter.
►Fig.14: 1. Capsule 2.Hignperformancelter
3. Twisthighperformancelterindirectionofarrow
to unfasten securing lip from cleaner unit and then pull
offthelter.
►Fig.15: 1.Securinglip
4. Cleanoutthenedustandlightlytaptodislodge
dustfromhighperformancelter.
Reassembly
Reassembly for normal lter
1. Putonlteruntilitisfullyinpositiononthecleaner
unit.
►Fig.16: 1. Filter
►Fig.17: 1. Filter
NOTE:Makesurelterisputonstraightwithout
beingpeeledback.Iflterisputonincorrectlyas
shown in diagram, dust will get into motor housing,
and cause motor failure.
2. Connectprelter.Atthistime,makesuretotwist
preltersothatsecuringlipisrmlylockedintocleaner
unit.
►Fig.18: 1.Prelter
►Fig.19
3. Connect capsule. Align O symbol on capsule with
Osymbolonhandleandthenrmlytwistcapsulein
direction of arrow until it is secured.
►Fig.20: 1.OMark
►Fig.21: 1. Handle 2. Capsule
NOTE: Always remove dust ahead of time, as suction
power will be reduced if there is too much dust in
cleaner.
NOTE:Alwaysbesuretocheckthatbothlterand
prelterareloadedcorrectlypriortousingcleaner.
If they are not loaded correctly, dust will get into the
motor housing, and cause motor failure.
Ifthefollowingexamplesoccur,lterandprelterare
not loaded correctly. Reload them correctly to rectify
problem.
Problem Examples
Example1:Onlyprelterhasbeenloaded(nolter)
►Fig.22: 1.Prelter
Example2:Onlylterhasbeenloaded(noprelter)
►Fig.23: 1. Filter
Example3:Filterhasbeenloadedinapeeledback
state
►Fig.24: 1. Filter
Example4:Prelter'ssecuringlipisnotrmlylocked
into groove of cleaner housing
►Fig.25: 1. Groove of cleaner housing 2.Prelter
3.Securinglip
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DCL181F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DCL181F in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info