Manual Makita DCL142 (page 10 of 52) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

600560

Zoom out

Zoom in

1/52

OPERATION

CAUTION:

• To connect attachments, such as nozzle, twist-insert

attachment in direction of arrow to ensure secure con-

nection during use. To disconnect attachment, twist-

extract also in direction of arrow. (Fig. 24)

Cleaning (Suction)

Nozzle (Fig. 25)

Attach the nozzle to clean off tables, desks, furniture, etc.

Nozzle slips on easily.

Nozzle + Extension wand (Straight pipe) (Fig. 26)

The extension wand fits in between the nozzle and the

cleaner itself. This arrangement is convenient for

cleaning a floor while standing erect.

Corner nozzle (Fig. 27)

Fit on the corner nozzle for cleaning corners and crevices

of a car or furniture.

Corner nozzle + Extension wand (Straight pipe)

(Fig. 28)

In tight quarters where the cleaner itself cannot squeeze

in, or in high places hard to reach, use this arrangement.

Cleaning without nozzle (Fig. 29)

You can pick up powder and dust without nozzle.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off before

attempting to perform inspection or maintenance.

After use

NOTE:

• Putting the cleaner against the wall without any other

support cause the cleaner to fall down and be dam-

aged. (Fig. 30)

Cleaning

From time to time wipe off the outside (cleaner body) of

the cleaner using a cloth dampened in soapy water.

Clean out also the suction opening, dust bag/dust pack

mounting area and the dust stopper. (Fig. 31)

CAUTION:

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

Wash the dust bag in soapy water when it is clogged with

dust and the cleaner power becomes small. Dry it out

thoroughly before use. An insufficiently dried bag may

cause poor suction and shorten the service life of the

motor. (Fig. 32)

NOTE:

• Dust pack is a throw-away type.

When the sponge filter is clogged with dust, remove it

from the cleaner and then wipe it off or wash in water.

Removing and installing the sponge filter (Fig. 33

& 34)

To remove the sponge filter, remove the dust bag or dust

pack and then pinch and take it out.

Press in the whole edge of the sponge filter against the

recessed wall inside the dust bag/dust pack mounting

area.

CAUTION:

• After cleaning sponge filter, be sure to install it on the

cleaner. If washed in water, dry it up before installing.

An insufficiently dried sponge filter may shorten the

service life of the motor.

Things to Check Before Asking for Repairs

011566

NOTE:

• Do not attempt to repair cleaner by yourself.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita cleaner specified in this

manual. The use of any other accessories or

attachments might present a risk of injury to persons.

Only use accessory or attachment for its stated

purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Extension wand (Straight pipe)

•Nozzle

• Nozzle for carpet

• Shelf brush

• Corner nozzle

• Round brush

• Flexible hose

• Paper pack

• Makita genuine battery and charger

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ from

country to country.

Symptom Area to be investigated Fixing method

Weak suction power

• Is dust bag or paper pack full of dust? • Empty dust bag or paper pack.

• Is dust bag clogged? • Dust down or wash the dust bag.

• Is paper pack clogged? • Replace paper pack.

• Is battery cartridge exhausted? • Charge the battery cartridge.

Not working • Is battery cartridge exhausted? • Charge the battery cartridge.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DCL142 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DCL142 Manual

Product: