Manual Makita DC1822 (page 4 of 32) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

600581

Zoom out

Zoom in

1/32

ENGLISH

CAUTION:

• Use a power source with the voltage specified on the nameplate of the charger.

• Do not charge the battery cartridge in a location exposed to direct sunlight.

• Do not charge the battery cartridge in presence of flammable liquids or gases.

• Charge the battery cartridge with room temperature at 10°C – 40°C (50°F – 104°F).

• Never carry charger by cord or yank it to disconnect from receptalce.

• Do not expose charger to rain or snow.

• This charger can be used in any vehicle having a cigarette lighter socket operated by a 12 volt negative ground bat-

tery. If battery capacity has dropped, start the engine of the vehicle. Charge the battery cartridge using this charger

while the engine is idling. Do not leave the vehicle while the engine is running.

• Non-rechargeable batteries cannot be charged with this battery charger.

• Do not allow anything to cover the charger.

• After charging, unplug the charger from the power source.

• Do not disassemble charger.

Charging

1. Plug the charger into the cigarette lighter socket. The charging light will flash in green color.

2. Insert the battery cartridge so that the plus and minus terminals on the battery cartridge are on the same sides as

their respective markings on the charger. Insert the cartridge fully into the port so that it rests on the charger port

floor.

3. When the battery cartridge is inserted, the charging light color will change from green to red and charging will

begin. The charging light will keep lighting up steadily during charging.

4. When charging is completed, the charging light color will change from red to green. The charging time is as fol-

lows:

Battery 7000, 7100, 7120, 9000, 9100, 9100A, 9120, 1200, 1200A, 1220, 1420, PA09, PA12 and PA14:

Approx. 30 minutes

Battery 7001, 9001, 9101, 9101A, 1201 and 1201A: Approx. 40 minutes

Battery 7002, 9002, 9102, 9102A, 9122, 1202, 1202A, 1222 and 1422: Approx. 45 minutes

Battery 7033, 9033, 9133, 1233 and 1433: Approx. 50 minutes

Battery 7034, 9034, 9134, 1234 and 1434: Approx. 60 minutes

Battery 9135, 1235, 9135A, 1235A, 1235F, 1435 and 1435F: Approx. 70 minutes

Battery 1822: Approx. 60 minutes

Battery 1833: Approx. 65 minutes

Battery 1834: Approx. 75 minutes

Battery 1835 and 1835F: Approx. 90 minutes

5. After charging, unplug the charger from the power source.

NOTE:

• The charger is for charging Makita battery cartridge. Never use it for other purposes or for other manufacturer’s bat-

teries.

• If the charger and/or battery cartridge are hot, the charging light may flash in red color. If this occurs, wait for a while.

Charging will begin after the charger and/or battery cartridge cool.

• If the charging light flashes alternately in green and red color, or flashes in green color when the battery cartridge is

inserted, a problem exists and charging is not possible. The terminals on the charger are clogged with dust or the

battery cartridge is worn out.

• Any of the following conditions indicates damage to the charger and/or battery cartridge. Ask your Makita Authorized

or Factory Service Center to check them.

1) The charging light does not flash (green) when the charger is plugged into a power source.

2) The charging light does not light up nor flash (red) when the battery cartridge is inserted in the charger port.

3) Charging is not completed at even more than two hours after red light comes ON at start of charging.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DC1822 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DC1822 Manual

Product: