600592

Makita DBM230 Manual

24
Zoom out
Zoom in
Previous page
1/82
Next page
23
Screw the plug-in nipple into
the foot plate, to which
previously seal strip has
been applied. Insert the
vacuum handle with the seal.
Fasten the vacuum handle with a
washer and hexagon hollow head plug
M8x30.
Connect the drill mount and the vacuum pump. Bring the drill mount in the correct
position and switch the pump on.
Check whether all 4 levelling screws in the foot plate are completely turned back
and a vacuum of min. -0.8 bar is achieved. By pressing the valve button on the
handle the drill mount may be disengaged and readjusted.
The vacuum pump has to run during the complete operation, it is to be
placed in such a way that you can always observe the pressure gauge. It is
mandatory to check that the foot plate is firmly affixed before you start
drilling.
Fixing the mount by means of clamping device
In order to brace the drill mount by means of a clamping device, the
distance between the opposite wall must be between 1,7 m and 3 m.
Position the drill mount. Position the clam
p
in
g
device as
close as
p
ossible behind the column on the base of the
mount. Fix the mount b
y
turnin
g
the crank (G) clockwise.
Secure the installation with the appropriate bolt (H).
Caution! The drill stand must be firmly connected to the surface. Otherwise
the operator might suffer injuries or the drill could be damaged.
Uncontrolled movements during drilling will cause the drill bit to hit the
surface to be drilled, this may cause chipping of the segments. The drill bit
might also tilt in the borehole which will also damage it.
G
H
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DBM230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DBM230 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info