Manual Makita DBM230 (page 21 of 82) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

600592

Zoom out

Zoom in

1/82

! If you want to enlarge a hole which you just drilled, close it in order to

achieve an adequate provision of cooling water.

! When working over-head, a water collecting ring must be used.

! Drain the water system when temperatures below the freezing point are

prognosticated.

The DBM 230 is equipped with a mechanical 3-gears transmission in oil bath.

Adjust the rotation speed of the engine to the drill diameter (for details see

identification plate).

Turn the gear switch to a faster/slower gear until it arrests. Gears must only be

shifted when the engine is at stand-still. It may be necessary to support the

switching operation by slightly turning the lead screw.

Warnung!

Never use force, shift gears only when the motor decelerates or is at stand-still!

Do not use tools e.g. wrenches, hammers for gear shifting!

Caution!

The tool is heavy and may heat up during operations or

sharpening. You could burn your hands, cut, tear or squash

yourself on the segments.

Before working on the equipment pull the power plug. Raise

the engine retainer with the core drill until it arrests in the

final position. Always wear protective gloves when changing

tools.

The drill spindle has a right-hand thread.

To retain the spindle use an open-end wrench 32mm on the drill spindle.

Never remove the drill bit by hitting it (with a hammer) as this will cause damage

to the core drill tool. Putting some waterproof grease on the drill spindle thread

and a copper ring placed between the spindle and the drill bit will further facilitate

the removal of the drill bit.

Changing the drill bit

Gear shifting

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita DBM230 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita DBM230 Manual

Product: