600592
18
Zoom out
Zoom in
Previous page
1/82
Next page
17
Work carefully and with concentration. Keep your work area
clean and avoid hazardous situations.
Take precautions for the protection of the operator.
If the cable is damaged or severed during operations, do not touch
the cable, immediately pull the main plug. Never use the tool when
the cable is damaged.
Before drilling in ceiling or walls make sure not to drill into electrical
mains, gas or water pipes. Use a metal detection system where
appropriate. Consult the structural engineer in charge in order to
determine the exact position of drilling before you start. When
drilling through ceilings, secure the area below as the drill core may
drop downwards.
Take care not to expose the tool to direct rain.
! Do not operate the tool in areas with explosion hazard.
! Do not operate while standing on ladders.
! Material containing asbestos must not be drilled.
! Never carry the tool by the cable. Before using the tool make sure to
check tool, cable and plug. Damages must be repaired by an
authorized specialist. Make sure that the tool is switched off before
connecting to the power outlet.
! Manipulations of the tool will result in a forfeit of the warranty.
! During operations the tool must be under constant supervision.
! The tool should be switched off and disconnected from power when
not under supervision, in case of mounting or dismounting the tool, in
case of voltage drops or when fixing or mounting accessories.
! If the engine stops during operations switch the tool off. Thus you
avoid an undesired sudden re-start of the engine.
! Do not use when parts of the housing, the switch, power cable or plug
are damaged.
! Electric tools must be visually inspected and tested by a specialist at
regular intervals.
! When operating the drill, cooling water must never get into the
motor and all electrical parts. Overhead-drilling must only be
performed while observing suitable safety precautions (water
collection).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DBM230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DBM230 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info