600593
7
Zoom out
Zoom in
Previous page
1/52
Next page
ad
Technical Characteristics
Rated voltage: 110 V
Rated power input: 1500 W
Load speed: 1
st
speed 0 - 1000 min
-1
2
nd
speed 0 - 2000 min
-1
Drilling capacity up to: 132 mm
Protection class: II
Collet: M 18
Weight(net): 5.5 kg
Collar clamping diameter: 53 mm
Diamond drill motors are designed for professionals and should onry be used by authorized persons.
All rights of changes due to technical development reserved.
Safety Instructions
Read and obey these instructions before using this machine.
ADDITIONAL SAFETY RULES FOR THIS MACHINE
1. Disconnect from mains supply whenever any work, servicing and adjustment or change of
accessories and cutters is required.
2. Only grip by insulated part of auxiliary handle and other plastic surfaces when performing drilling
where cutter is likely to contact hidden electrical wiring or its own cable. Contact with a “Live”
wiring will make all exposed metal surfaces of the machine “Live” and danger for an electric shock.
3. Before using the machine, inspect and check power cord and plug for signs of damage and if any
found, have these repaired or replaced immediately. Plug the cord in only after making sure that
mains switch is OFF.
4. Machine should never be damp or wet. Do not use the machine in damp or wet locations.
5. For longer machine use, wear hearing protectors.
6. Likewise it is recommended to wear safety helmet, safety glasses and/or face shield. Also wear a
dust mask and thickly padded gloves.
7. Prior to work starting, make sure that cutting accessory is fitted properly.
8. Before starting work carefully check all screws for tightness. Due to vibration screws come loose
and can cause serious breakdown or injury.
9. Keep sure-footing and body balance at all times for better control of reaction torque.
10. Make sure no one is below when using the machine in high locations.
11. Keep hands well away from rotating parts.
12. When working this tool always use auxiliary side handle and hold the machine firmly with both
hands. Keep secure stance.
13. Do not leave the machine running unattended. Switch ON only when hand-held.
14. Avoid touching near dry-cut immediately after work process. Area can be very hot and cause
severe burns.
15. To avoid machine self-starting, always trigger-off the switch should power supply become
interrupted or plug accidentally withdrawn from the socket while motor is still running.
Main Instructions
Auxiliary Handle
In hand held drilling operations, only use the machine with the auxiliary handle fixed. This handle must be
tighten on the collar, by turning the lever.
ON/OFF Setting
The machine is equipped with an electronic ON/OFF switch. The more the switch is pressed, the higher is
the speed. This allows very precise drilling. In nomal working conditions, always work at maximum speed.
ENGLISH
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DBM130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DBM130 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info