Manual Makita CL104D (page 10 of 60) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

600673

Zoom out

Zoom in

1/60

4. Overlap the frame of dust stopper with that of the dust

pack. (Fig. 18)

5. Place the dust stopper and the dust pack together into

the cleaner cavity in the same direction of arrow on

the dust stopper. Insert them all the way into the slots

in the cleaner cavity. (Fig. 19)

6. Place the entire container part of the dust pack inside

the tool itself. (Fig. 14)

7. Close the front cover completely.

CAUTION:

• Install the dust stopper with the dust bag or dust pack

properly. Tool operation without proper installation of

them, or using broken or ripped one, it may allow dust

to get into the motor. This may result in motor failure.

• Do not fold the cardboard at its opening when installing

the paper pack.

• Never throw away the dust stopper because it needs to

be used repeatedly whenever either the dust bag or the

dust pack is used.

• The paper pack for the cleaner is an important

component for maintaining the tool performance. If you

use the other genuine paper pack, it may cause

smokes or ignition.

OPERATION (Fig. 20)

To connect attachments, such as nozzle, twist and insert

them to ensure secure connection during use. To

disconnect attachments, twist and remove them.

Cleaning (Suction)

Nozzle (Fig. 21)

Attach the nozzle to clean off tables, desks, furniture, etc.

Nozzle slips on easily.

Nozzle + Extension wand (Straight pipe) (Fig. 22)

The extension wand fits in between the nozzle and the

cleaner itself. This arrangement is convenient for cleaning

a floor while standing erect.

Corner nozzle (Fig. 23)

Fit on the corner nozzle for cleaning corners and crevices

of a car or furniture.

Corner nozzle + Extension wand (Straight pipe)

(Fig. 24)

In tight quarters where the cleaner itself cannot squeeze

in, or in high places hard to reach, use this arrangement.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off before

attempting to perform inspection or maintenance.

After use

When storing the cleaner, hang it from a nail using the

hand strap. (Fig. 25)

NOTE:

• Putting the cleaner against the wall without any other

support cause the cleaner to fall down and be

damaged. (Fig. 26)

Cleaning (Fig. 27)

From time to time wipe off the outside (cleaner body) of

the cleaner using a cloth dampened in soapy water.

Clean out also the suction opening, dust bag/dust pack

mounting area and the dust stopper.

CAUTION:

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

Wash the dust bag in soapy water when it is clogged with

dust and the cleaner power becomes small. Dry it out

thoroughly before use. An insufficiently dried bag may

cause poor suction and shorten the service life of the

motor. (Fig. 28)

NOTE:

• Dust pack is a throw-away type.

When the sponge filter is clogged with dust, remove it

from the cleaner and then wipe it off or wash in water.

Removing and installing the sponge filter

To remove the sponge filter, remove the dust bag or dust

pack and then pinch and take it out. (Fig. 29)

Press in the whole edge of the sponge filter against the

recessed wall inside the dust bag/dust pack mounting

area. (Fig. 30)

CAUTION:

• After cleaning sponge filter, be sure to install it on the

cleaner. If washed in water, dry it up before installing.

An insufficiently dried sponge filter may shorten the

service life of the motor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita CL104D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita CL104D Manual

Product: