476836
15
Zoom out
Zoom in
Previous page
1/84
Next page
15
ENGLISH (Original instructions)
Explanation of general view
1 Red part
2 Button
3 Battery cartridge
4 Lock-off button
5 Switch trigger
6 Front hand guard
7 Lock
8 Unlock
9 Adjusting screw
10 Carabiner
(rope attachment point)
11 Slightly slide
12 Move in the upright position
13 Press in
14 Loosen
15 Sprocket cover
16 Adjusting dial
17 Sprocket
18 Adjusting pin
19 Small hole
20 Tighten
21 Lever
22 Low
23 High
24 Guide bar
25 Saw chain
26 Oil tank cap
27 Oil tank opening
28 Oil inspection window
(for refilling the tank with oil)
29 Oil inspection window
30 Lower guide
31 Felling area
32 Felling direction
33 Danger zone
34 Escape route
35 Scabbard (chain cover)
36 File forward stroke
37 1/5 of the file diameter
38 Small dust or particles
39 Slotted bit screwdriver
40 Locking ring
41 Limit mark
42 Brush holder cap
43 Screwdriver
SPECIFICATIONS
Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
ENE031-1
Intended use
The tool is intended for cutting lumbers and logs.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
GEB071-5
CORDLESS CHAIN SAW SAFETY WARNINGS:
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw chain
is not contacting anything. A moment of inatten-
tion while operating chain saws may cause entan-
glement of your clothing or body with the saw chain.
2. Always hold the chain saw with your right hand
on the rear handle and your left hand on the
front handle. Holding the chain saw with a reversed
hand configuration increases the risk of personal
injury and should never be done.
3. Hold the power tool by insulated gripping sur-
faces only, because the saw chain may contact
hidden wiring. Saw chains contacting a “live” wire
may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
4. Wear safety glasses and hearing protection. Fur-
ther protective equipment for head, hands, legs
and feet is recommended. Adequate protective
clothing will reduce personal injury by flying debris
or accidental contact with the saw chain.
5. Before starting work, check that the chain saw is in
proper working order and that its condition complies
with the safety regulations. Check in particular that:
The chain brake is working properly;
The run-down brake is working properly;
The bar and the sprocket cover are fitted cor-
rectly;
The chain has been sharpened and tensioned in
accordance with the regulations;
6. Do not operate a chain saw in a tree. Operation of
a chain saw while up in a tree may result in personal
injury.
Model BUC250
Chain speed per minute 8.3 m/s (500 m/min)
Length of guide bar 250 mm
Guide bar type Sprocket nose bar Carving bar
Saw chain
Type 91VG 25AP
Pitch 3/8” 1/4”
No. of drive links 40 60
Number of teeth 6 9
Overall length 576 mm 589 mm
Net weight 4.5 kg
Rated voltage D.C. 36 V
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BUC250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BUC250 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info