476840
11
Zoom out
Zoom in
Previous page
1/84
Next page
11
Do not use force when inserting the battery
cartridge. If the cartridge does not slide in easily, it
is not being inserted correctly.
Switch action
CAUTION:
Before inserting the battery cartridge into the tool,
always check to see that the switch trigger
actuates properly and returns to the "OFF" position
when released.
Fig.2
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided.
To start the tool, depress the lock-off button and pull the
switch trigger. Release the switch trigger to stop.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out
any work on the tool.
Installing or removing saw chain
CAUTION:
Always be sure that the tool is switched off and the
battery cartridge is removed before installing or
removing the saw chain.
Always wear gloves when installing or removing
the saw chain.
Use only saw chain and guide bar with bar tip
designed for this chain saw (see the Extract from
the spare parts list).
In order to prevent kickback, do not remove the bar
tip or replace the guide bar with one without a bar
tip.
Fig.3
Loosen the screw by turning counterclockwise the knob
until the sprocket cover comes off.
Remove the sprocket cover.
Remove saw chain and guide bar from the tool.
Fig.4
Fit in one end of the saw chain on the top of guide bar.
At this time, fit the saw chain as shown in the figure
because it rotates in the direction of arrow.
Fig.5
Place the saw chain so that the spring and boss are
positioned inside it and fit in the other end of saw chain
around the sprocket as shown in the figure.
Fig.6
While turning the guide bar counterclockwise, install it so
that the end of guide bar contacts the spring.
Fig.7
Insert the hook of sprocket cover into the hole in the tool
and then place the sprocket cover on the tool.
Fig.8
Turn the knob clockwise to tighten the screw firmly.
Adjusting saw chain tension
Fig.9
Just a slight loosening of the screw allows the saw chain
tension to be adjusted. After adjusting, retighten the
screw firmly.
Fig.10
CAUTION:
For a while after a new saw chain is installed, it
tends to become loosened. From time to time
check the saw chain tension before use.
Low tension of saw chain may cause coming out of
place.
Installing or removing saw chain should be carried
out in a clean place free from sawdust and the like.
OPERATION
Lubrication
Fig.11
Saw chain is automatically lubricated when the tool is in
operation.
Check the amount of remaining oil in the oil tank through
the oil inspection window.
To refill the tank, remove the cap from the oil tank
opening. The oil tank capacity is 80 ml.
After refilling the tank, always screw the provided oil tank
cap on the chain saw.
CAUTION:
When filling the chain saw with chain oil for the first
time, or refilling the tank after it has been
completely emptied, add oil up to the bottom edge
of the filler neck. The oil delivery may otherwise be
impaired.
As a saw chain oil, use oil exclusively for Makita
chain saws or oil available in market.
Never use oil including dust and particles or
volatile oil.
When pruning trees, use botanical oil. Mineral oil
may harm trees.
Never force the chain saw when pruning trees.
Before cutting out, make sure that the provided oil
tank cap is screwed in place.
Hold the chain saw away from the tree. Start it and wait
until lubrication on saw chain is adequate.
Bring the tip guide/lower guide into contact with the
branch to be cut before switching on. Cutting without
bringing the tip guide/lower guide into contact with the
branch may cause the guide bar to wobble, resulting in
injury to operator.
Saw the wood to be cut by just moving it down.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BUC122 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BUC122 in the language / languages: English, German as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info