600708
4
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISH
Explanation of general view
1 Red part
2 Button
3 Battery cartridge
4 Terminal cover
5 Charging lights
6 Battery charger
7 Socket
8 Anvil
9 Pin
10 O-ring
11 Switch trigger
12 Reversing switch lever
13 A side
14 B side
15 Clockwise
16 Counterclockwise
17 Example: Setting dial 52
18 Second digit
19 First digit
20 Fastening time
21 Seconds
22 Number of impacts
23 (Dial setting)
24 Limit mark
25 Brush holder cap
26 Screwdriver
SPECIFICATIONS
Model BTW151
Capacities
Standard bolt ........................................... 10 mm 16 mm
High tensile bolt ........................................ 8 mm 12 mm
Square drive ............................................................ 12.7 mm
No load speed (min
–1
) .......................................... 0 2,300
Impacts per minute ............................................... 0 3,000
Max. fastening torque .............................................. 150 N
.
m
Overall length ............................................................ 200 mm
Net weight (with battery cartridge) ............................... 1.9 kg
Rated voltage ...................................................... D.C. 14.4 V
Due to our continuing program of research and develop-
ment, the specifications herein are subject to change with-
out notice.
Note: Specifications may differ from country to country.
Safety Hints
For your own safety, please refer to the enclosed safety
instructions.
IMPORTANT SAFETY INSTRUCTIONS
FOR CHARGER & BATTERY
CARTRIDGE
ENC002-3
1. SAVE THESE INSTRUCTIONS This manual con-
tains important safety and operating instructions for
battery charger.
2. Before using battery charger, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
3. CAUTION — To reduce risk of injury, charge only
MAKITA type rechargeable batteries. Other types of
batteries may burst causing personal injury and dam-
age.
4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended or sold by
the battery charger manufacturer may result in a risk
of fire, electric shock, or injury to persons.
6. To reduce risk of damage to electric plug and cord,
pull by plug rather than cord when disconnecting
charger.
7. Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
8. Do not operate charger with damaged cord or plug
replace them immediately.
9. Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way; take
it to a qualified serviceman.
10. Do not disassemble charger or battery cartridge; take
it to a qualified serviceman when service or repair is
required. Incorrect reassembly may result in a risk of
electric shock or fire.
11. To reduce risk of electric shock, unplug charger from
outlet before attempting any maintenance or clean-
ing. Turning off controls will not reduce this risk.
12. The battery charger is not intended for use by young
children or infirm persons without supervision.
13. Young children should be supervised to ensure that
they do not play with the battery charger.
14. If operating time has become excessively shorter,
stop operating immediately. It may result in a risk of
overheating, possible burns and even an explosion.
15. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
ADDITIONAL SAFETY RULES FOR
CHARGER & BATTERY CARTRIDGE
1. Do not charge battery cartridge when temperature is
BELOW 10°C (50°F) or ABOVE 40°C (104°F).
2. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
3. Do not allow anything to cover or clog the charger
vents.
4. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow, over-
heating, possible burns and even a breakdown.
5. Do not store the tool and battery cartridge in loca-
tions where the temperature may reach or exceed
50°C (122°F).
6. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
7. Be careful not to drop, shake or strike battery.
8. Do not charge inside a box or container of any kind.
The battery must be placed in a well ventilated area
during charging.
ADDITIONAL SAFETY RULES FOR
TOOL
ENB025-1
1. Be aware that this tool is always in an operating
condition, because it does not have to be plugged
into an electrical outlet.
2. Hold tool by insulated gripping surfaces when per-
forming an operation where the cutting tool may
contact hidden wiring. Contact with a ‘live’’ wire will
also make exposed metal parts of the tool ‘‘live’ and
shock the operator.
3. Wear ear protectors.
4. Check the socket carefully for wear, cracks or dam-
age before installation.
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BTW151 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BTW151 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info