386545

Makita btp 140 sfe Manual

6
Zoom out
Zoom in
Previous page
1/76
Next page
6
ENGLISH
Explanation of general view
1Button
2 Red part
3 Battery cartridge
4 Switch trigger
5Lamp
6 Reversing switch lever
7 Action mode change lever
8 Adjusting ring
9 Graduation
10 Pointer
11 Bit
12 Sleeve
13 Bit-piece
14 Hook
15 Screw
16 Groove
17 Standard bolt
18 Fastening torque
19 Proper fastening torque
20 Fastening time
21 High tensile bolt
22 Limit mark
23 Rear cover
24 Screws
25 Spring
26 Arm
27 Recessed part
28 Carbon brush cap
29 Hole
SPECIFICATION
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for impact screw driving in wood and
for impact drilling in brick, concrete and stone as well as
for drilling and screw driving without impact in wood,
metal, ceramic and plastic.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
SPECIFIC SAFETY RULES
GEB026-1
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict
adherence to 4 mode impact driver safety rules. If
you use this power tool unsafely or incorrectly,
you can suffer serious personal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
Model BTP130 BTP140
Impact driver mode
Max. fastening torque 135 N•m 140 N•m
Capacities
Machine screw 4 mm – 8 mm
Standard bolt 5 mm – 14 mm
High tensile bolt 5 mm – 12 mm
No load speed (min
–1
) 0–2,400 0–2,300
Impacts per minute 0 – 3,200
Hammer drill mode
No load speed (min
–1
) 0–2,400 0–2,300
Blows per minute 0 – 28,800 0 – 27,600
Capacities Concrete 8 mm
Drill mode
No load speed (min
–1
)
High (2) 0–2,400 0–2,300
Low (1) 0 – 700
Capacities
Steel
High (2) 6.5 mm
Low (1) 10 mm
Wood
High (2) 9 mm
Low (1) 21 mm
Screw driver mode
No load speed (min
–1
) 0–2,400 0–2,300
Capacities Machine screw M4
Overall length 186 mm
Net weight 1.7 kg 1.8 kg
Rated voltage D.C. 14.4 V D.C. 18 V
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita btp 140 sfe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita btp 140 sfe in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info