598616
4
Zoom out
Zoom in
Previous page
1/52
Next page
4
ENGLISH (Original instructions)
Explanation of general view
1Button
2Red part
3 Battery cartridge
4 Switch trigger
5Lamp
6 Light button
7 Reversing switch lever
8 Changed in three steps
9Hard
10 Medium
11 Soft
12 Hammering force button
13 LED indicator
14 Bit
15 Sleeve
16 Hook
17 Screw
18 Groove
19 Standard bolt
20 Fastening torque
21 Proper fastening torque
22 Fastening time
23 High tensile bolt
SPECIFICATION
Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
Specifications may differ from country to country.
Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GEB054-1
CORDLESS IMPACT DRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator
an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
Model BTD132
Capacities
Machine screw 4 mm – 8 mm
Standard bolt 5 mm – 14 mm
High tensile bolt 5 mm – 12 mm
No load speed (min
–1
)
Hammer mode (Hard) 0 – 2,400
Hammer mode (Medium) 0 – 1,800
Hammer mode (Soft) 0 – 1,100
Impacts per minute
Hammer mode (Hard) 0 – 3,200
Hammer mode (Medium) 0 – 2,600
Hammer mode (Soft) 0 – 1,100
Overall length
With one-touch bit holder 139 mm
Without one-touch bit holder 140 mm
Net weight (with battery cartridge) 1.4 kg
Rated voltage D.C. 14.4 V
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BTD 132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BTD 132 in the language / languages: Danish, Portuguese, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita BTD 132

Makita BTD 132 User Manual - English, German, Dutch, French, Italian - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info