79223

Makita BO 4556 Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
6
For Model BO4555
For European countries only
ENG101-1
Noise
The typical A-weighted noise level determined according
to EN60745-2-4:
Sound pressure level (L
pA
): 80 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection
Vibration
ENG212-1
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-4:
Work mode: sanding metal plate
Vibration emission (a
h
): 2.5 m/s
2
or less
For Model BO4556
For European countries only
ENG101-1
Noise
The typical A-weighted noise level determined according
to EN60745-2-4:
Sound pressure level (L
pA
): 82 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
ENG211-1
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-4:
Work mode: sanding metal plate
Vibration emission (a
h
): 3 m/s
2
Uncertainty (K): 1.5 m/s
2
For Model BO4557
For European countries only
ENG101-1
Noise
The typical A-weighted noise level determined according
to EN60745-2-4:
Sound pressure level (L
pA
): 76 dB (A)
Uncertainty (K): 3 dB (A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
Vibration
ENG211-1
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-4:
Work mode: sanding metal plate
Vibration emission (a
h
): 3.5 m/s
2
Uncertainty (K): 1.5 m/s
2
EC-DECLARATION OF CONFORMITY
Model; BO4555, BO4556, BO4557
ENH101-8
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
CE 2007
Tomoyasu Kato
Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BO 4556 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BO 4556 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info