Manual Makita BO 3700 (page 5 of 11) (English, German, Dutch, Danish, French, Italian, Norwegian)

79031

Zoom out

Zoom in

1/11

For hook-and-loop type of abrasive paper with pre-

punched holes (optional accessory):

Remove the pad for the conventional type of abrasive

paper from the tool with a screwdriver. (Fig. 3)

Install the pad for the hook-and-loop type of abrasive

paper (optional accessory) on the tool. Tighten the

screws firmly to secure the pad. Remove all dirt or for-

eign matter from the pad. Attach the paper to the pad,

aligning the holes in the paper with those in the pad.

(Fig. 4)

CAUTION:

Always use hook-and-loop type of abrasive papers.

Never use pressure-sensitive abrasive paper.

Installing dust bag (Fig. 5)

Attach the dust bag onto the dust spout. The dust spout

is tapered. When attaching the dust bag, push it onto the

dust spout firmly as far as it will go to prevent it from com-

ing off during operation. For the best results, empty the

dust bag when it becomes about half full, tapping it lightly

to remove as much dust as possible.

Paper dust bag

To install the paper dust bag, place the paper dust bag on

the paper dust bag holder with its front side upward.

Insert the front fixing cardboard of the paper dust bag

into the groove of the paper dust bag holder. (Fig. 6)

Then press the upper part of the front fixing cardboard in

arrow direction to hook it onto the claws. (Fig. 7)

Insert the notch of the paper dust bag into the guide of

the paper dust bag holder. Then install the paper dust

bag holder set on the tool. (Fig. 8 & 9)

Switch action (Fig. 10)

CAUTION:

Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

To start the tool, simply pull the trigger. Release the trig-

ger to stop. For continuous operation, pull the trigger and

then push in the lock button. To stop the tool from the

locked position, pull the trigger fully, then release it.

Operation (Fig. 11)

Turn the tool on and wait until it attains full speed. Then

gently place the tool on the workpiece surface. Keep the

base flush with the workpiece and apply a light pressure

on the tool.

CAUTION:

• Never run the tool without the abrasive paper. You may

seriously damage the pad.

• Never force the tool. Excessive pressure may decrease

the sanding efficiency, damage the abrasive paper and/

or shorten tool life.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

ACCESSORIES

CAUTION:

These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The

use of any other accessories or attachments might

present a risk of injury to persons. The accessories or

attachments should be used only in the proper and

intended manner.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Abrasive paper

(with pre-punched holes)

• Hook-and-loop type of abrasive paper

(with pre-punched holes)

• Punch plate

• Hose 28-1.5

• Backing pad

(For use with hook-and-loop type of abrasive paper)

• Backing pad

(For use with conventional type of abrasive paper)

• Paper dust bag

• Paper dust bag holder

Grit 60 80 120 180 240

Use Coarse Medium Fine

Grit 60 80 120 180 240

Use Coarse Medium Fine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita BO 3700 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 0,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita BO 3700 Manual

Product: